C) REAR LiGHT AND REAR INDICATORS (FIG. 27)
1. Remove the screws (1 -FIG. 27) for the rear light or the screws (3 -
FIG. 27) for the rear indicators.
2. Remove the glass shields (2-4 -FIG. 27).
3. Press the bulb lightly and turn it anticlockwise.
4. Remove the bulb from the socket.
5. Install the new bulbs correctly following the procedure in the reverse
order.
LUGGAGE RACK (FIG. 28) -OPTIONAL EXTRA
Proceed as follows to fit the rack:
1. Make holes in the rear fairing in the premarked point (2 -FIG. 28).
2. Use the screws supplied to fasten the rack to the rear fairing (1-2-
FIG. 28).
To Next Page
Loading...