Oxygen LEPTON - Changing the Rear Reduction Gear Oil (Fig. 17); Frontwheel (Fig.17-18)

29
CHANGING THE REAR REDUCTION GEAR OIL (FIG. 17)
In order to assure the scooter's lengthy service life and efficient running, change the oil after the first 500 km, and then
every 10,000 km or once every 2 years.
Perform the first four operations indicated in "CHECKING THE REAR REDUCTION GEAR OIL LEVEL" .
Let alI the oil drain out of the oil sump.
Tighten the drain plug (2) and pour 40 cmq of oil into the filler neck (1).
Tighten the filler cap (1).
WARNING: Check periodically for oil leaks around the seals of the sump's cover. If you detect
any leakage, contact an authorized OXYGEN S.P.A. dealer.
Do not use the scooter when there is not enough lubricant or using incorrect lubrlcants as they
help moving parts wear down quicker and may result in irreparable damage.
FRONTWHEEL (FIG.17-18)
Disassembly
1. Set the scooter on the stand and use supports to prevent it falling.
2. Unscrew and remove the wheel pin nut (1 -FIG. 18).
3. Remove the wheel pin (2- FIG. 19), taking note of the positioning of
the spacers and the device connecting to
Fig. 18