Maintenance measures: Looking after the battery
A number of simple steps will ensure the batteries remain efficient and ready to work:
Visual inspection of the terminals and battery case: neither must be damaged or cracked. The terminals can be
damaged.
If they are bent, deformed or feature any burnt parts, the battery must no longer be used.
Keep the batteries clean
The batteries must be cleaned with clean rags. Where necessary, use lukewarm water containing a small amount of
detergent. It is prohibited to clean the batteries with abrasive agents or solvents.
Said materials may damage the plastic of the battery case. The battery terminals must be cleaned with a copper wire
brush or tools specific for the task.
Temperature effect
The performance may be deteriorate whit use at low temperatures
New electric battery
A new battery must undergo a number of complete charging/discharging cycles before the best performance can be
achieved.
For a long life to your battery
1. Your Scooter is equipped whit a low voltage cutout. This means that when your battery is discharged, the
controlled will shut off the motor. If this happens, you must recharge the scooter immediately to avoid damaging
your battery permanently
2. Recharge the battery every time that is possible
To Next Page
Loading...