---------------------------------------------------------------------------------------------------------------------------------
12
Description: when the extensions in indirect dialing-out mode want to call outward form the free
C.O.line ,he should dial outgoing code first. Default setting is 9.
Call-operator code is the code when the extension want to call operator(first and sencond)
directly, he can dial the code instead dial operator number.(refer 5.14)
When Outgoing code X=1- 9 then call-operator code is 0,this is default code.
When Outgoing code X=0 then call-operator code is 9
● Call-operator Code setting
Format: 0 0 0 0 1 0 #
Description: to set the first digit of function code to be # , at the same time to set office code to be
* , this is default setting.
Format: 0 0 0 0 1 1 #
Description: to set the first digit of function code to be *,at the same time to set the office code to
be #,
Explanation: When the extension indirect dialing-out mode want to accomplish a function
operation ,such as pick up( # 9)、booking C.o.line(# 0) etc…(refer charpter 5
Operating Instruction),you first should press the first digit of function code ,then input
other operation code(default setting is #) Office code means when a extension in
direct mode dialing-out mode want to dial other extensions ,then he first should dial
office code (default setting is *).
4.3 System Date/Time and Charge setting
4.3.1 System date/time setting
Format: 0 1 YY MM DD #
Description: Setting year/month/date of system
Explanation: YY: year, 00-99 MM: month, 01-12 DD: date, 01-31
Format: 0 2 HH TT #
Description: Setting Hour/Minute of system
Explanation: HH: hour, 00-23, 24 hours mode TT: minutes, 00-59
Format: 0 2 0 0 0 0 W #
Description: Setting week of system
Explanation: W: Week, 1-7(7 = Sunday )
Example: Set system to 2008/10/12 16:30 Sunday
To Next Page
Loading...
