PABX CDX-CP832 - Fast Dialing Operator; Operator Attendant Ringing Setting; Ringing Mode When All the Ringing Extensions Is Busy; Ringing Extensions Assignment; to Cancel in Day Mode

---------------------------------------------------------------------------------------------------------------------------------
20
the second operator will ringing.
3、In operator mode, this setting doesn’t change the ringing extension assignment
4.9.2 Fast Dialing Operator
Format: 1 5 2 0 # default setting.
Description: enable the extensions dialing call-operator code to call the operator quickly,
Format: 1 5 2 1 #
Description: disable the extensions to dialing call-operator code to call the operator quickly.
4.10 Operator Attendant Ringing Setting
4.10.1 Ringing mode when all the ringing extensions is busy
Format: 1 8 8 0 #
Description: While the C.O.line come in, and all the ringing extensions assigned to C.O.line is
busy , the system will send waiting call beep to the ringing extensions for every five
seconds, these extensions is assigned to the C.O.line,this is default setting.
Format: 1 8 8 1 #
Description: While the C.O.line come in,and all the ringing extensions assigned to C.O.line is
busy,instead of sending the waiting call beep, the system will find the first idle
extension begin from Ext. 601 to Ext. 632 in sequence then ringing it.
These setting will take effect only when the system in operator mode
4.10.2 Ringing Extensions Assignment/ to Cancel in Day Mode
Format: 3 0 M N 0 #
Explanation: M: the C.O. line No. M=1 – 8
N: the Ext. series No. N= 01 –32 (N=01 means Ext.601 …… N=32 means Ext.632)
Description: In operator mode when calling of No.M C.O. line come in and system in day mode(in
default setting system in day mode), No. N Ext. will ring at the same time.
In default setting only Ext601, 602 will ring.