---------------------------------------------------------------------------------------------------------------------------------
14
0 4 9 0 0 # to set from Monday to Sunday as work day ; this is default setting
0 4 9 0 W # to set week W as work day
0 4 9 1 0 # to set from Monday to Sunday as weekend day
0 4 9 1 W # to set week W as weekend day.
Explanation: W: Week, 1-7(7 = Sunday )
Description: Weekend mode means when the day in week is set to work day ,then the system’
day/night mode will change according the setting in 4.5.1& 5.1, and when the day is
define to weekend day,then the system is in night mode.
Example: To set Monday to Friday as work day,and Saturday and Sunday as weekend day,then
iput 04900# ,04916#,04917# ,0480# ,also you should Set day/night mode to
automatically mode and day mode start & end time.
4.5 C.O.Lines Status Setting
4.5.1 Enable C.O. Lines
(suit for the machine which no C.O.Line Auto-Detected function)
Format: 0600 # Enable all C.O. lines
Format: 060M# Enable M C.O.line
If the machine has no C.O.line auto-detected function，You must use these commands
according the actual trunk lines before using this product!!! If you don’t enable any C.O. line,
the system will consider there is no C.O. line and doesn’t auto detect C.O. line!!!
In some special place, external line is not very steady and that will be caused the C.O.line
detection is not correct (such as wrong ringing), so that can choose the machines which have
no C.O.line auto-detected function, just enable and disable the C.O.lines before using.
4.5.2 Disable C.O. Lines
(suit for the machine which no C.O.Line Auto-Detected function)
Format: 0610 # Disable all C.O. lines
Format: 061M # Disable the M C.O. line
NOTE:CP832 series standard configure is auto-detected and TP832 series is not auto-detected.
4.5.3Trunk Lines(C.O.lines) Working Assignment(UCD)
Format: 0 6 2 0 #
Description: This setting make the system assign the different trunk lines working averagely, it
means the system will use the trunk lines circulating. (For example: the system will
To Next Page
Loading...
