---------------------------------------------------------------------------------------------------------------------------------
34
[*] # 2 7 N # : Clear busy (or nobody available) forwarding setting for No.N Ext.
[*] # 2 7 # : Clear busy (or nobody available) forwarding setting for all Ext.
[*] # 2 5 # : Clear any settings of call forwarding for all Ext. whether directly forwarding
setting or busy (nobody available) forwarding setting.
When power failure, refer to 4.17.3, this setting will be stored or not.
Explanation: <abcd> is desired Ext number to be transferred, abcd=601 – 632(default number)
N: Ext. series No ,N=01-32 (N=01 means Ext.601 …… N=32 means Ext.632)
5.6 Switch the holding music source form external&internal
Format: [*] # 2 8 # to switch the holding music source coming from external input to be
coming from internal build in muisc or to switch the holding music
source coming from build in muisc to be coming from external input
1、This command can be inputted only in Programming Extensions
2、Refer to 4.7.4 ,you can define the source of holding music in programming mode.
3、Once you make the command,the holding music switch on time.
5.7 Outward Dialing
5.7.1 Outward Dialing Directly
Format: Pick up the handset and dial desired number directly after hearing the C.O. line tone.
Description: Making outgoing calls from Exts with direct-dialing-out mode(refer 4.11) ,
Example: You call out with number 0757-86228930 ,then you pickup telephone which in
direct-dialing-out,hear the C.O. line tone,then dial 0757-86228930.
Allows you to redial the last telephone number
5.7.2 Outward Dialing by dialing outging code(9) first.
Format: Pick up the handset and dial outging code( default setting is 9) first after hearing the
internal dialing tone , then dial the desired number after hearing the C.O. line dialing
tone.
Description: When the Ext is in indirect-dialing-out mode, you’ll hear the internal dialing tone after
pick up the handset, dial 9 then you enter the C.O. line, you may dial the desired
number after hearing the C.O. line dialing tone.
1、Allows you to redial the last telephone number
2、The user should dial outging code( 9) within 10 seconds after hearing the internal
dialing tone.
To Next Page
Loading...
