PABX CDX-CP832 - Called Extension no Answer Process; Operator Setting

---------------------------------------------------------------------------------------------------------------------------------
19
extension is busy, then the system cut off the line; this is the default setting.
Format: 1650#
Description: when the called extension is busy, the call transferred to operator.
Format: 1656#
Description: when the called extension is busy,the call transferred to the operator attendant
ringing extension.
Format: 1655# when the called extension is busy, system send prompt tone to the extension
Above setting just for one paragraph OGM mode.
4.8.3 Called Extension No Answer Process
Format: 166#
Description: when the called extension no answer, the C.O. line will be cut off; this is the default
setting.
Format: 1660#
Description: when called extension no answer,the call transferred to operator.
Format: 1666#
Description: when called extension no answer, the call transferred to the operator attendant
ringing extensions.
Above setting just for one paragraph OGM mode.
4.9 Operator Setting
4.9.1 Operator Setting
Format: 150N# set frist operator (N=01-32)
Format: 151N# set second operator (N=01-32)
Default Setting: frist operator is 602, second operator is 601
Description: this function can adjust the frist and second operator according to the user’s setting.
Example: In the programming, input 15006# to set 606 is the frist operator, input 15108# to set
608 is the second operator.
1、If just need one operator, can set the two operator same number.
2、When anyone call to the operator, the first operator will ringing when it is idlesse otherwise