Need help?Do you have a question about the Paccar MX Series and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Configuration | Inline 6-cylinder |
| Displacement | 12.9 liters |
| Torque Range | 1850 lb-ft |
| Emission Standard | GHG17 |
| Bore | 5.12 inches (130 mm) |
| Aspiration | Turbocharged |
| Fuel System | Common Rail |
Lists related documents and software applications used for engine parameter adjustments.
Explains the structure, sections, and conventions used throughout the programming guide.
Explains engine power and torque ratings and their impact on driveline components.
Lists standard and feature options for MX-13 engine horsepower and torque ratings.
Lists standard and feature options for MX-11 engine horsepower and torque ratings.
Lists orderable MX-13 and MX-11 engine configurations with associated sales codes.
Covers basic engine parameters like High Exhaust System Temperature Warning and Fuel Density.
Details the High Exhaust System Temperature warning feature and its parameters.
Explains the Fuel Density parameter for improving fuel economy calculations.
Defines the minimum engine operating speed and its adjustable range.
Manages engine idling time to improve fuel economy with customizable options.
Controls the fan clutch based on various engine temperatures for cooling.
Customization options for minimum fan clutch engagement time.
Allows the driver to set and adjust a target vehicle speed for efficient driving.
Details Adaptive Cruise Control (ACC) and Multi-Torque Mode options.
Configurable settings for cruise control activation, speed limits, and behavior.
Limits the maximum vehicle speed and acceleration for fuel economy.
Limits overall vehicle speed, particularly for GHG compliant vehicles.
Controls vehicle acceleration rate to optimize performance or fuel economy.
Monitors engine conditions and applies derate or shutdown to prevent damage.
Details the standard 'Derate' function to reduce engine performance.
Lists conditions that trigger warning, derate, or shutdown reactions.
An integrated compression brake that enhances vehicle control and reduces brake wear.
Details options like engagement delay, speed settings, and operating modes.
Functions to automatically retard speed or limit speed downhill.
Provides engine speed controls and interlocks for PTO-driven equipment.
Component protection measures that prevent engine entry into PTO mode.
Configurable parameters for PTO engine speed and torque limits.
Allows the engine to limit vehicle speed based on a customer-supplied input.
Defines the conditions under which the ARSL feature is activated or deactivated.
Reduces maximum torque output to protect driveline components.
Conditions that determine when driveline protection is active or inactive.
Promotes fuel-efficient shifting habits by managing engine speed.
Encourages earlier shifts in lower gears to improve fuel economy.
Restricts road speed in gears below top gear to promote shifting to top gear.
Records engine sensor and calculated output data over the vehicle's life.
Details the types of engine data recorders: Trip/Chart, Snapshot, and Faststop.
Helps drivers reduce fuel consumption by signaling optimal upshift points.
Provides visual notifications to the driver for upshifting at predefined engine speeds.
Incentivizes drivers to meet fuel economy and idle time goals.
Evaluates driver performance based on fuel economy and idle time.
Settings for fuel economy and idle time thresholds, bonuses, and penalties.
Improves engine starting capabilities in extreme cold weather conditions.
Lists sales codes for enabling the Ether Starting Aid feature.
Protects the aftertreatment system from damage caused by extended idling.
Automatically performs hydrocarbon desorption during extended idling.
Conditions required for the Auto HC Desorb feature to activate or deactivate.
Detailed list of all programmable engine parameters with their settings.
Clarifies common configuration errors and requirements for resolution.
To Next Page
