13
Connecting the Set-Top Box
To view programs broadcast in high definition, your set-top box must be connected to a
suitable high-definition TV or computer monitor. Your set-top box is also compatible
with standard-definition TVs and VCRs.
Your set-top box should have been connected to your TV by your installer. However, if
you need to disconnect and re-connect your equipment, please read the information in
this chapter carefully before you re-connect the set-top box to your TV or home theater
receiver.
WARNING: Before you begin:
• Do not connect your set-top box (or any other equipment such as a TV or DVD
player) to the AC power supply until you have properly connected all the other
cables.
• Disconnect your set-top box from the AC power supply before you disconnect any
other equipment from its rear panel.
• To disconnect power from your set-top box, always detach the power supply unit
from the wall electrical outlet (rather than removing the cord from your set-top box).
You should install your set-top box near a wall electrical outlet that is easily
accessible.
• Any cable connected to the DIGITAL AUDIO jack must be a fiber optic TOSLINK
connector, not a regular audio cable.
• If you are in any doubt about the power supply cord, its plug or its connection,
consult a qualified electrician.
To Next Page
Loading...
