107
Platform with 3 Foot Controls
Step on the foot control (44) and on the additional foot
control (42).
The platform is lowered and automatically adjusts to the
ground.
Lifting the Platform
Platform with 2 Foot Controls
Step on the foot control (41) and keep it in this position.
After one second at the earliest and three seconds at the
latest, step on the foot control (40) and keep it in this posi-
tion.
Before the platform is lifted it tilts to the horizontal position.
Note: If both foot controls are not actuated within three seconds,
the foot controls are disabled for a short time. Wait a few
seconds before you repeat the procedure.
Platform with 3 Foot Controls
Step on the foot control (43) and on the additional foot
control (42).
Before the platform is lifted it tilts to the horizontal position.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 107 Donnerstag, 15. August 2019 4:04 16