131
Service and Maintenance
Maintenance Intervals
DANGER!
Risk of accidents and injury!
If the instructions in chapter "General Information" are not ob-
served during maintenance or service of the tail lift or column
lift, personal injuries and material damage can occur.
Before working on the tail lift or column lift, read chapter
“General Operation” from p. 26.
Activity
Daily
Depending on Usage
Monthly
Quarterly
Semi-annually
Annually
Checking the function and presence of the
safety and warning devices
X
Cleaning the tail lift
X
Checking the battery X
Checking the carbon brushes at the elec-
tric motor
X
Checking the oil level and refilling oil, if
necessary
X
Checking the bolts and nuts for tight seat X
Checking the screw fittings and pipes of
the hydraulic system
X
Lubricating the low-maintenance bearings X
Lubricating the guide rails X
Changing the oil X
Applying wax spray to the PC board X
Checking the marks on the platform for the
payload center of gravity and the operator
position (when operating the tail lift or col-
umn lift with the hand cable control) are
readable and in a good condition, refresh-
ing the marks using an abrasion-resistant
paint, if required
X
Betriebsanleitung_Hubladebuehnen_EN.book Seite 131 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
