40
To switch off the tail lift using the battery main switch:
Turn the battery main switch counterclockwise until the cam
is engaged.
The visual signal indicating the operational readiness of the
tail lift extinguishes. The tail lift is switched off.
Driver’s Cab Control System
Note: If the vehicle is provided with a driver’s cab control system
with camera system, read and observe the supplement to
the operating instructions attached to the driver’s cab con-
trol system as a separate document.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 40 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
