EasyManuals Logo

Palfinger MBB C 1000 S User Manual

Palfinger MBB C 1000 S
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
111
42
43
44
42 Pushbutton: lift
43 Pushbutton: tilt
44 Pushbutton: lower
Hand Cable Control with three Pushbuttons
(Models used until May 2019)
DANGER!
Risk of accidents and injury!
If the instructions in chapter "General Information" are not ob-
served during operation of the tail lift, personal injuries and
material damage can occur.
Before operating the tail lift, read chapter “General Opera-
tion” from p. 26.
DANGER!
Crushing hazard due to wrong operator position!
If the operator does not stand in the correct position when
moving the platform via the hand cable control, personal in-
jury and material damage may occur .
Make sure to stand in the correct position (see the picture
below) when operating the platform with the hand cable
control. Do not stand in another position.
When operating the platform with the hand cable control
while standing inside the vehicle, always keep a minimum
distance of 250 mm from the sill.
Do not stand in the squeezing area where the platform ap-
proaches the vehicle body.
Exclusively stand in the platform area marked with the foot
symbols in the illustration when moving the platform.
When standing on the ground for operating the platform,
keep a minimum distance of 1 m from all platform rims.
Make sure that you can see the entire working area and
that no other person stays on or near the platform.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 111 Donnerstag, 15. August 2019 4:04 16

Table of Contents

Other manuals for Palfinger MBB C 1000 S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Palfinger MBB C 1000 S and is the answer not in the manual?

Palfinger MBB C 1000 S Specifications

General IconGeneral
BrandPalfinger
ModelMBB C 1000 S
CategoryLifting Systems
LanguageEnglish

Related product manuals