119
Lowering the Platform
Press the pushbuttons (28) and optionally (29) simultane-
ously and hold them in this position until the platform has
made contact with the ground.
After the platform has touched the ground it tilts and adjusts
to the ground.
Lifting the Platform
Press the pushbuttons (27) and optionally (29) simultane-
ously and hold them in this position until the platform has
reached the vehicle loading floor height.
The platform tilts to the horizontal or preset position before
it is lifted.
Closing the Platform
Press the pushbuttons (27), (32) and optionally (29) simul-
taneously and hold them in this position until the platform is
closed.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 119 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
