123
Lowering the Platform
Press the pushbuttons (28) and (29) simultaneously and
hold them in this position until the platform has made con-
tact with the ground.
After the platform has touched the ground it tilts and adjusts
to the ground.
Lifting the Platform
Press the pushbuttons (27) and (29) simultaneously and
hold them in this position until the platform has reached the
vehicle loading floor height.
The platform tilts to the horizontal or preset position before
it is lifted.
Closing the Platform
Press the pushbuttons (27), (32) and (29) simultaneously
and hold them in this position until the platform is closed.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 123 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
