76
Moving to the BDF Position
Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the torsion frame is
located above its horizontal position.
Turn the rotary switch (30) upwards.
The platform moves to the preset BDF position.
Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the platform has
reached the loading position.
Folding In and Retracting the Platform
Turn the rotary switches (27) and (29) simultaneously
downward and hold them in this position until the platform
has reached the ground.
Protect your hands with gloves.
Pull the handle with both hands to fold back the folding part
of the platform.
Close the platform interlock (if present).
Turn the rotary switch (30) upward and hold it in this posi-
tion until the platform has reached the vibration safeguard.
The platform automatically folds over and then lifts into the
retraction position. Subsequently it retracts completely and
lifts into the vibration safeguard.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 76 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
