87
Folding Out the Platform
Loosen the platform interlock (if present).
Turn the rotary switches (27) and (29) simultaneously
downward and hold them in this position until the platform
has almost reached the vertical position.
The platform is lowered slightly and then tilts via the guide
pulley almost to the vertical position.
Protect your hands with gloves.
Pull the handle with both hands to fold out the platform to
the rear.
Turn the rotary switches (28) and (29) simultaneously
downward and hold them in this position until the platform
has reached the horizontal position.
Fold the folding part of the platform with both hands to the
operating position.
Lowering the Platform
Turn the rotary switches (27) and (29) simultaneously
downward and hold them in this position until the platform
has made contact with the ground.
After the platform has touched the ground it tilts and adjusts
to the ground.
Lifting the Platform
Turn the rotary switches (27) and (29) simultaneously up-
ward and hold them in this position until the platform has
reached the loading position.
Folding In the Platform
Make sure that the platform is in horizontal position touch-
ing the ground.
Protect your hands with gloves.
Unfold the folding part of the platform with both hands from
the operating position onto the stationary part of the plat-
form.
Turn the rotary switches (28) and (29) simultaneously up-
ward and hold them in this position until the platform has
reached the vertical position.
Protect your hands with gloves.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 87 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
