Palfinger V Series User Manual

20
FITTING MAIN FUSE ASSEMBLY
Make an allowance for looping the wire next
to the fuse assembly, run the battery cable
from the power pack.
Using clips and cable ties as required, do not
attach to brake or fuel pipes, route the cable,
also avoiding fuel tanks, exhaust systems
and vehicle suspension parts.
Protect the fuse from road spray to stop
terminal corrosion.
Warning: The link to the battery should only be connected when the installation
of the wiring is complete.
The fuse holder should have the green
disconnect label pointing to the battery
terminal.
Warning: The main fuse assembly order should be as shown.

Palfinger V Series Specifications

General

Brand	Palfinger
Model	V Series
Category	Lifting Systems
Language	English