Pall Allegro MMG403 User Manual

33
4. Adjust auto logout time
• Login to the system as supervisor
• Press the setup button on the main menu screen
• Select the ‘auto logout’ function using the up and down arrows
• Press the curved arrow to go to the entry screen
• Enter the time for auto logout then press enter
5. View runtime counter indicators for system runtime and motor runtime
• Login to the system as supervisor
• Press the setup button on the main menu screen
• Select the ‘runtime hrs’ function using the up and down arrows
• Press the curved arrow to go to the view screen
• The screen will indicate accumulated runtime separately for both system and motor
rotation
• Press to return to the settings list magnetic mixer
6. Export of Recipe library to memory card
• Insert a micro SD card into the memory slot (See section 0)
• Login to the system as supervisor
• Press the setup button on the main menu screen
• Select the ‘recipe imp/exp’ function using the up and down arrows
• Press the curved arrow to open the next screen (Figure 36)
• Press the file number button to go to the entry screen
• On the entry screen input the file number (0-9) you wish to export and press enter
• Press the export recipes button and confirm when prompted (Figure 37).
• The entire library will be exported to the micro SD card under filename
LIBRARYX.BAK, where X is the file number entered on the previous step.
• A confirmation notice will appear after the file writing is finished (this may take several
minutes)
• Acknowledge the notice and press to return to the settings list
Figure 36: Import/Export screen (left). Confirmation screen (right)

Pall Allegro MMG403 Specifications

General

Brand	Pall
Model	Allegro MMG403
Category	Laboratory Equipment
Language	English