Palsonic HDSTB200 - Connecting to a Conventional TV with S-Video; Connecting to a Conventional TV with Composite Video

14
Connecting you HD-STB
This HD-STB simultaneous output the HD Video and SD Video. So, you can watch HD Video and
recording SD Video at the same time.
For the SD Video connection, please refer below diagram.
Connecting to a Conventional TV with S-Video
Connect a S-Video cable to the S-Video terminal on the rear of HD-STB. Connect the
other end of S-Video cable to the S-Video input terminal on the TV. (Refer to Fig. 6)
Fig. 6 TV with S-Video Connection
Connecting to a Conventional TV with Composite Video
Connect a Video Cable to the TV Video terminal on the rear of the HD-STB.
Connect the other end of Video Cable to the Video input terminal on the TV.
(Refer to Fig. 7)
Fig. 7 TV with Composite Video Connection