Palsonic HDSTB200 - Specifications

34
Specifications
HDMI Output
Native Mode: 1080i. 720p, 576p
HD YPbPr Output
Native Mode: 1080i, 720p, 576p
MPEG-1 layers and 2, MPEG-2 layers 2
Dolby Digital (AC-3)
Frequency Response
Audio
Terrestrial Input Signal Input Frequency
VHF 174MHz to 230MHz
UHF 520MHz to 820MHz
Transmission System
Channel Assignment Australian Assignment
Channel Offset
Antenna input
75 Female IEC-Connector (PAL Type)
Loop Output
OFDM Spectrum Mode 2K and 8K Hierarchical
Modulation Modes QPSK, 16QAM, 64QAM
Guard Interval Modes
1/32, 1/16, 1/8, 1/4 Active Symbol Duration
FEC Modes Rate 1/2, 2/3, 3/4, 5/6, 7/8
Video MPE-2 compatible MP@ML, MP@HL
All of Australia Digital TV Standard
Display Aspect Ratio Widescreen or PB Zoom
HD Digital Video Output
HD Analog Video output
32, 44.1 and 48kHz
Stereo (RCA phone jack), 2.0Vrms Max.
>10K ohm (1 Sets)
Algorithm
SD Video Output
Sampling Frequency
Analog Audio Output
Digital Audio Output
Channel Bandwidth
Input Signal Level
Algorithm
Decoding Format
S/PIDF optical (TOS Link) S/PIDF Coaxial (RCA)
20Hz~20kHz < 2db
S-Video (Y/C), Composite Video (CVBS)
DVB-T/OFDM
7MHz
+/- 125KHZ
-90dBm ~ -20dBm
75 Male IEC-Connector (PAL Type)
Detailed section Explanation
Section