35
Specifications
Note : Specifications are subject to change without notice.
Using Direct Entry Remote Control
Universal Code Setting
1) Locate your CE component brand in R/C Code List.
2) Turn on the component you wish to control.
3) Press &hold component key until component key red LED remains on, then release
it.
4) Enter 3 digit code from the R/C Code list Component key LED flashes three times
and TV switches off.
5) If component does not switch off, repeat above steps using the next code number as
listed for your component brand until component switches off.
Environmental
Condition
Power
Controller Features Main CPU 32 bit RISC
Upgrade via RS-232C (9 pin D-SUB connector)
Menu System Graphic User Interface
Channel Memory Max. 256 Channel
Remote Controller IR Remote Controller with Universal TV Key
Power
AC 180 - 250V ~ 5%, Max. 15W
Operating Frequency
Standby Power Consumption
Less than 2W
Power Protection Slow Blow Fuse (250V, 2A)
Operating Temperature 0~ 40
0
C
Storage Temperature -10 ~ +50
0
C
Operating Humidity
Storage Humidity
5% ~ 90% Non-condensed
Weight Approx. 1.3Kg
Detailed section Explanation
Section
SW Download
50/60Hz 5%
Dimension
280mm x 39mm x 199mm (WxHxD)
5% ~ 90% Non-condensed
To Next Page
Loading...