10 (E)
Checking the system operations
After purchasing your camera-recorder, follow the
instructions for checking the system operations to
ensure that the unit is working properly before you
attempt to shoot anything.
1 Connect the DC cord to the DC input socket.
2 Connect the other end of the DC cord and one end
of the AC cord to the AC adapter.
3 Plug the other end of the AC cord into the power
outlet.
1 Slide the OPEN/EJECT lever in the direction shown
by the arrow to open the cassette cover.
When the cover is fully opened, the cassette holder
pops out automatically.
2 Insert the cassette tape.
Getting ready
Connecting the power cord
Connect the cords properly as shown in the fig-
ure above.
The battery cannot be charged when power is being
supplied to the camera-recorder from the AC
adapter.
AC adapter AC cord
DC cord Mini DV cassette tape
N
O
O
P
The AC adapter is designed to switch over automati-
cally to the supply voltage (110 V, 120 V, 220 V or
240 V) and frequency (50 Hz or 60 Hz) of every
country in the world.
However, in some countries the power outlet may be
a different shape. If this is the case, you will have to
purchase an adapter plug that fits your power outlet;
however, only do this after consulting with your
dealer.
Inserting the cassette tape
OPEN/EJECT
Cassette holder
Cassette cover
AG-DVC60E_En.fm 10 ページ ２００４年９月２日 木曜日 午後１時４３分
To Next Page
Loading...
