- 162 -
To avoid overexposure, select the compression level of the high intensity video signals received
through the image sensor.
1 Touch [KNEE MODE].
2 Touch / to select the setting item.
3 Touch [EXIT] to exit the menu screen.
This adjusts the knee point position in 0.5% steps when [KNEE MODE] is set to [MANUAL].
1 Touch [KNEE MASTER POINT].
2 Touch / to adjust settings.
≥ You can select a value between 80.0 and 107.0.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “93.0”.
This sets the knee inclination when [KNEE MODE] is set to [MANUAL].
1 Touch [KNEE MASTER SLOPE].
2 Touch / to adjust settings.
≥ You can select a value between 0 and 99.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “85”.
Selects the DRS (Dynamic Range Stretcher) function. (l 91)
[KNEE MODE]
[AUTO]: Sets the level automatically according to the signals received.
[MANUAL]: Applies the [KNEE MASTER POINT] and [KNEE MASTER SLOPE]
settings.
[OFF]: Disables the Knee function.
[KNEE MASTER POINT]
[KNEE MASTER SLOPE]
[DRS]
[ON]/[OFF]
AG-UX180ED(DVQP1171ZA)_E.book 162 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
