32
Basic operations
(continued)
■Operations on the AK-HRP200 Remote Operation Panel
GAIN
AUTO
BLACK
SET UP
WHITE
BARS
TEST
VF
POWER
HEAD
POWER
DTL
OFF
SHUTTER
ON
STEP/SYNC
KNEE
OFF
SKINDTLMATRIX5600K
SCENE 4
STORE
SCENE 3
SCENE 2
SCENE/USER FILE
SCENE 1
USER 3
USER 2USER 1
SHIFT
FLARE/PED
CAMERA
No.
DTL
DATA
SET
DISPLAY SELECT
UP
DOWN
SET UP
ND/CC M.GAIN/M.PED
SHUTTER
ND
VR LOCK
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
IRIS/M.PED LOCK IRIS
M.PED
CHARA
MENU
SELECT
TALLY/CALL
ALM OPT
SENSE
PUSH
PREVIEW
EXT
D.EXT
COARSEAUTO
FULL
OPENCLOSE
CLOSE
EXECUTEEXIT
SAVE/LOAD
SHIFT
+
UP+DOWN
For selecting the cameras to be operated.
1. Press and hold the [SELECT] button for
about 2 seconds.
The camera number in the camera number
display area blinks.
2. Press the lit [UP]/[DOWN] button.
Press the lit [UP]/[DOWN] button to select
the camera number.
3. Press the [SELECT] button.
Control of the selected camera is enabled.
For operating the camera menus.
When the [CHARA/MENU] button is pressed
for 2 seconds, the selected camera menu
is displayed, overlapping the camera output
image. When it is pressed for 2 seconds while
a camera menu is displayed, the menu is
exited.
SELECT:
Turn SELECT to move the cursor up and
down in the camera menu or to change
setting values. Press SELECT to move to
the next level of a menu item or to change a
setting value at the lowest level.
●
Camera menu operation
1 Press and hold the [CHARA/MENU] button on
the AK-HRP200 for about 2 seconds.
The AW-HE40 camera menu appears on the monitor.
2 Turn the SELECT dial to select an AW-HE40
camera menu item or to change a setting value.
Turn the SELECT dial to move the cursor up and down
or to change setting values.
Press the SELECT dial to move to the next level of a
menu item or to change a setting value at the lowest
level.
3 To exit the camera menu, press and hold the
[CHARA/MENU] button for about 2 seconds.
To Next Page
Loading...
