48
Camera menu items
(continued)
■Others 3/3 screen
### Others 3/3 ###
OSD Off With Tally Off
OSD Status Off
Audio Off
Input Volume ----
Plugin Power ----
Protocol
Model Select SEVIHD1
Return
OSD Off With Tally [Off, On]
This is used to enable or disable the function for clearing
the OSD menu displays when the tally signal is received
by a command or contact.
When the tally signal is released, the original OSD menu
displays are restored.
OSD Status [Off, On]
“Off” or “On” is set here for the status display which
appears during AWB operations.
Audio [Off, On]
Enable/disable the audio input signal from the device
connected to the audio input connector.
Input Volume
[Mic High, Mic Middle, Mic Low, Line High,
Line Middle, Line Low]
Set the mic input, line input, and volume.
Mic High:
Use the mic input with the volume set to high.
Mic Middle:
Use the mic input with the volume set to medium.
Mic Low:
Use the mic input with the volume set to low.
Line High:
Use the line input with the volume set to high.
Line Middle:
Use the line input with the volume set to medium.
Line Low:
Use the line input with the volume set to low.
Plugin Power [Off, On]
Turn the plugin power for the audio off/on.
Protocol Model Select
[SEVIHD1, SBRC300, SBRCZ330, Reserved1 to 7]
Set the protocol model for standard serial communication.
Do not select “Reserved1” to “Reserved7”.
Return
Use this to return to the previous menu.
To Next Page
Loading...
