60
Controls and settings from web screen
(continued)
■Setup screen
The settings for the unit are selected on this screen.
● The setting menu operations can be performed only by users whose access level is “1. Administrator”.
For the procedure used to set the access level, refer to page 78.
●
Basic screen
Press the button to switch to the Setup screen on which to establish the camera’s settings.
When the [Setup] button is pressed, the login screen
shown below is displayed.
The initial settings for the user name and password are
given below.
User name admin
Password 12345
When the [OK] button is clicked after inputting the values,
the screen shown below is displayed.
Click the [OK] button.
● While the initial settings remain used for the user
name and password, a message prompting the
user to change the user name and password is
displayed after authorization.
In order to ensure security, the password for the
user name of “admin” must be changed without fail.
It is also recommended that the password be
changed at regular intervals.
Note
To Next Page
Loading...
