75
Controls and settings from web screen
(continued)
● Output
This item’s setting is reflected when the [Set] button is
pressed.
Format
For 59.94Hz:
[Auto, 1080/59.94p, 1080/59.94i, 1080/29.97PsF,
1080/29.97p, 720/59.94p]
For 50Hz:
[Auto, 1080/50p, 1080/50i, 1080/25PsF, 1080/25p,
720/50p]
The video format is changed on this screen.
The formats of the images which can be output differ
between the AW-HE40H and AW-HE40S.
For details on how to change the format, refer to
“Changing the format” (page 45).
● Frequency [59.94Hz(NTSC), 50Hz(PAL)]
This item is selected to switch the frame frequency.
● When the frequency is switched, “Format” is set as
follows.
59.94Hz 50Hz
1080/59.94p
1080/50p
1080/59.94i
1080/50i
1080/29.97PsF
1080/25PsF
1080/29.97p
1080/25p
720/59.94p
720/50p
● If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
Note
● Others
This item’s setting is reflected when the [Set] button is
pressed.
Install Position [Desktop, Hanging]
“Desktop” or “Hanging” is selected here as the method
used to install the unit.
Desktop Stand-alone installation
Hanging Suspended installation
● When “Hanging” has been selected, the top, bottom,
left and right of the images will be reversed, and
up/down/left/right control for panning and tilting will also
be reversed.
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at
Preset Speed (1 to 30) values that are based on the table
set here.
Slow Set the preset speed table to “Slow”.
Fast Set the preset speed table to “Fast”.
Preset Speed [1 to 30]
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
● If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Note
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A Pan, Tilt, Zoom (including digital zoom),
Focus, Iris, Gain, White-BAL
Mode B Pan, Tilt, Zoom (including digital zoom),
Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
To Next Page
Loading...
