76
Controls and settings from web screen
(continued)
Freeze During Preset [Off, On]
Turn the function for freezing images during preset
playback off/on.
When this is set to “On”, preset playback is performed
with a still of the image immediately preceding the start
of preset playback being output. The image freeze is
released when preset playback is finished.
● When this is set to “On”, the start of preset
operations may be delayed momentarily due to the
image being frozen.
● When HDR is set to “Low” or “High”, this is set to
“Off”.
Notes
Zoom Mode
[Opt.Zoom, i.Zoom, D.Zoom, D.Extender]
Configure the maximum zoom magnification.
Opt.Zoom Use only the optical zoom. Up to 30x
optical zoom is possible.
i.Zoom Enable the i.Zoom function.
Enabling this function allows you to
perform electronic zoom while reducing
drops in picture quality.
Combining optical zoom and electronic
zoom, up to 40x zoom is possible.
D.Zoom Enable the digital zoom function.
Picture quality degrades as zoom
increases with digital zoom.
D.Extender Enable the digital extender function.
When this function is enabled, you can
perform optical zoom while maintaining a
fixed digital zoom magnification. Smooth
zooming operations will be possible at the
cost of slight degradation in the image
quality.
Max Digital Zoom [x2 to x16]
Set the maximum digital zoom magnification.
This is only enabled when Zoom Mode is set to “D.Zoom”.
Image Stabilizer [Off, On]
Turn the digital image stabilization function off/on.
● The field of view will be narrower when the image
stabilization function is active.
● When “On” is selected, video will be delayed by
1 frame.
● When switching between “On” and “Off”, the
image may go black and the audio may be muted
temporarily.
● Image stabilization cannot be performed while
Frame Mix is active.
● The effect of the image stabilization function is
reduced in low-light environments.
● The unit’s image stabilizer function detects
movement from the image signal and performs
correction. Depending on the shooting conditions,
the function may not be able to differentiate between
movement of the subject and movement of the unit,
resulting in correction errors.
Notes
Speed With Zoom POS. [Off, On]
“Off” or “On” is set here for the function used to adjust the
camera direction’s adjustment speed in conjunction with
the zoom magnification.
When “On” is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Focus Mode [Auto, Manual]
“Auto” or “Manual” is set here for the focusing function.
Auto The subjects are always brought into focus
automatically.
Manual The focus is operated manually.
Focus ADJ With PTZ. [Off, On]
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations at the manual focus
setting.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
Tally [Disable, Enable]
“Enable” or “Disable” is set here for the function which
turns on or turns off the tally lamp using the tally control
signal.
To Next Page
Loading...
