EasyManua.ls Logo

Panasonic AW-HN40HKPC - Controller Supported; Accessories; Optional Accessories

Panasonic AW-HN40HKPC
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Controller supported
AW-RP50: Ver 3.10.00 or later
AW-RP120: Ver 2.10.00 or later
AK-HRP200: Ver 4.10-00-0.00 or later
If the version older, an upgrade is required.
For details on upgrading, visit the support page on the following website.
http://pro-av.panasonic.net/
For details on AW-RP555 and AW-RP655, refer to page 23 in the <Operations and Settings>.
Accessories
Check that the following accessories are present and accounted for.
After removing the product from its container, dispose of the power cable cap and packing materials in an appropriate
manner.
Mount bracket for installation
surface
(Hanging / Desktop) ............. 1
( page 9, page 15)
Main unit mounting screw
(with flat washer, spring
washer) M3 x 6 mm ............. 1
( page 10, page 15)
Drop-prevention wire ........... 1
(already attached to the unit)
( page 9, page 15)
Bracket mounting screws
(bind-head) M4 x 10 mm ...... 4
( page 9, page 15)
AC adaptor ........................... 1
Power cable (1.5 m [4.92 ft])
for AW-HN40HWPC,
AW-HN40HKPC,
AW-HN38HWPC,
AW-HN38HKPC .............. 1
for AW-HN40HWE, AW-HN40HKE,
AW-HN38HWE, AW-HN38HKE .....................................................3
For U.K. and Saudi Arabia
For Continental Europe, etc.
For India only
This product is equipped with
3 types of AC mains cable.
Appropriate mains cable must
be used in each local area,
since the other type of mains
cable is not suitable.
Optional accessories
Wireless remote controller AW-RM50G
(Size “AA”, “R6” or “LR6” dry battery x 2, obtained separately)
Direct ceiling mount bracket WV-Q105A

Related product manuals