50
Symptom Cause and remedial action
Reference
pages
Cannot operate using
the controller
● Is the unit connected to the controller properly?
Refer to the Operating Instructions of the controller.
P.19 to 24
● The user authorization must be set to OFF when the AW-RP50,
AW-RP120, and AK-HRP200 remote camera controllers are
connected in a network.
<Operations and
Settings>
P.88
● Are all the cameras in the daisy-chain connection turned on? P.20
● It may be necessary to upgrade the version of the controller so
that the controller will support the unit.
P.36
The unit turns in the
opposite direction to the
one operated
● Has the stand-alone (Desktop) installation setting been selected
correctly?
<Operations and
Settings>
P.46, P.84
● The reversal setting may have been established at the controller if
the unit is connected to the controller.
Refer to the Operating Instructions of the controller.
–––
Troubleshooting
(continued)
To Next Page
Loading...
