Panasonic AW-RP50E

3 (E)
How to turn the power of the remote cameras on and off
 How to turn the power of the
remote cameras on
Follow one of the procedures below to turn on the power of
the remote cameras.
 Turning on the power one camera at a time
 Turning the power of the cameras on simultaneously as
the unit’s power is turned on
 Turning on the power of a multiple number of cameras
• Turning on the power of all the cameras
• Turning on the power of the selected group of cameras
Each of these procedures is described in turn below.
Turning on the power one camera at a time
1 Select the remote camera.
When the corresponding CAMERA STATUS/
SELECTION button is held down, the name of the
remote camera is displayed on the top line of the LCD
panel and POWER OFF is displayed on the bottom line.
2 Turn the F2 dial to select “ON”, and press the
F2 dial.
The power of the selected remote camera is turned on.
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PT ACTIVEAUTOIRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
123
AWB/ABB
4
SHUTTER
5
12345
678910
CAM100<AW-HE50 >
POWER: ON
1
2
Turning the power of the cameras on simultaneously
as the unit’s power is turned on
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is lit, the
[CAMERA] menu is displayed on the LCD panel.
[1]GROUP ▼
3 Turn the F1 dial to display the [POWER] menu,
and press the F1 dial.
[2]POWER
1.CAM POWER ▼
ALL OFF
Press the F1 dial.
4 Turn the F1 dial to display the [AUTO ON]
menu.
2.AUTO ON ▲
On
1.CAM POWER ▼
ALL OFF
Turn the F1 dial.
5 Turn the F2 dial to select “On”, and press the
F2 dial.
When “Serial” or “Network” has been selected as the
CAMERA CTL item on the [SYSTEM] menu for any
of the remote cameras, the power of those remote
cameras will be turned on simultaneously as the unit’s
power is turned on.
Depending on the number of cameras connected, it may
take some moments for the unit’s operation to take effect.
Note