Panasonic AW-RP50E

45 (G)
Taste Menüposten Steuervorrichtung Anfangswert Einstellung
9 SETUP [1]USER 1.USER1 AWB SWLINK, BUSCONT, FASIST,
CAMSEL, TALLY_IP, CAMINF,
AWB, ABB, POWER OFF
2.USER2 ABB SWLINK, BUSCONT, FASIST,
CAMSEL, TALLY_IP, CAMINF,
AWB, ABB, POWER OFF
[2]SW LINK 1.SWLINK On Off, On
2.BUSCONT Off Off, On
3.BUS AUX AUX, PVW, PinP, KEY
4.FASIST Off Off, On
5.CAMSEL Off Off, On
6.TALLY_IP Off Off, On
7.P/T LEVER Self Self, SW, Button Select
[3]SW DISP 1.CAMINF On Off, On
2.FORMAT On Off, On
3.CAMNAME On Off, On
4.SCENE On Off, On
5.GAIN On Off, On
6.SHUTTER On Off, On
7.IRIS On Off, On
8.FILTER On Off, On
9.ALARM On Off, On
[4]OPERATE 1.PAN DIR NORMAL NORMAL, REVERSE
2.TILT DIR NORMAL NORMAL, REVERSE
3.ZOOM DIR NORMAL NORMAL, REVERSE
4.FOCUS DIR NORMAL NORMAL, REVERSE
5.SPEED WITH Z AW-HE50 Off, On
AW-HE100 Off, 1, 2
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
Off, 1, 2
6.SPEED TARGET P/T/Z/F P/T/Z/F, P/T
7.FOCUS/IRIS STANDARD STANDARD, EXCHANGE
8.P/T CURV 1 1 bis 5
[5]PRESET 1.DIAG SPEED AW-HE50 1 bis 30
AW-HE100 30 1 bis 30
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
30 1 bis 30
2.SCOPE AW-HE50 30 MODE A, MODE B, MODE C
AW-HE100 30 “–––”
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
“–––”
3.HOME POSITION SET
Tabelle der Menüposten