UHD crop setting screen [UHD Crop]
Crop Output PTZ
This is used for camera control. The same operations are possible
as with the camera controller operated in the live screen [Live].
(→ page 99)
Crop Mode [Off, Crop(1080), Crop(720)]
Sets the Crop function which crops UHD(3840×2160) images.
Off Disable the Crop function.
Crop(1080)
Crops the designated area from UHD(3840×2160)
images and outputs 1920×1080 images.
The images are cropped to the following sizes.
• When [Crop Zoom] is [OFF]
Crops with 1920×1080 angle of view to output
1920×1080 size.
• When [Crop Zoom] is [ON]
Crops area according to the value specified in [Zoom]
(Crop Zoom Ratio) on [UHD Crop] screen and outputs
the cropped image in 1920×1080 size.
(→ page 130)
This is enabled when [Format] is the following.
2160/59.94p, 2160/29.97p
2160/50p, 2160/25p
2160/24p, 2160/23.98p
Crop(720) Crops the designated area from UHD(3840×2160)
images and outputs 1280×720 images.
The images are cropped to the following sizes.
• When [Crop Zoom] is [OFF]
Crops with 1280×720 angle of view to output 1280×720
size.
• When [Crop Zoom] is [ON]
Crops area according to the value specified in [Zoom]
(Crop Zoom Ratio) on [UHD Crop] screen and outputs
the cropped image in 1280×720 size.
(→ page 130)
This is enabled when [Format] is the following.
2160/59.94p, 2160/50p
Factory settings: Off
<NOTE>
• When [Crop Mode] is changed, IP video transmission is temporarily
stopped.
• When [Crop Mode] is changed from [Off] to [Crop(1080)], the
[Format] of [Output] for each of the 12G SDI OUT, 3G SDI OUT and
HDMI connectors changes to FHD (1920×1080).
• When [Crop Mode] is changed from [Off] to [Crop(720)], the
[Format] of [Output] for each of the 12G SDI OUT, 3G SDI OUT and
HDMI connectors changes to FHD (1280×720).
• When [Crop Mode] changes from [Crop(1080)] or [Crop(720)] to
[Off], the [Format] of [Output] for each of the 12G SDI OUT and
HDMI connectors does not change back to UHD (3840×2160).
• When [Crop Mode] is [Crop(1080)] or [Crop(720)], the following
values cannot be set in [Streaming mode].
H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD), SRT(H.264
UHD), SRT(H.265 UHD)
(→ page 111)
• When H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD),
SRT(H.264 UHD) or SRT(H.265 UHD) is selected in [Streaming
mode] and [Crop Mode] is switched to [Crop(1080)] or [Crop(720)],
the [Streaming mode] setting changes to [H.264].
• When [Crop Mode] is [Crop(1080)] or [Crop(720)], [Zoom Mode] is
disabled and functions as [Opt.Zoom].
Crop Zoom [OFF, ON]
Sets whether UHD(3840×2160) images should be cropped by using
digital zoom.
OFF Images are cropped to the following sizes.
• When [Crop Mode] is Crop(1080)
1920×1080
• When [Crop Mode] is Crop(720)
1280×720
ON Enables the changing of the crop size in the following
range, using digital zoom.
768×432 (When [Zoom] (Crop Zoom Ratio) on the
[UHD Crop] screen is set to 500.00%)
3200×1800 (When [Zoom] (Crop Zoom Ratio) on the
[UHD Crop] screen is set to 120.00%)
(→ page 130)
• When [Crop Zoom] is set to [ON], the image quality is
grainer than when it is [OFF].
This is only enabled when [Crop Mode] is set to [Crop(1080)] or
[Crop(720)].
Factory settings: OFF
Zoom (Crop Zoom Ratio) [120.00% to 500.00%]
Specifies the size of the crop frame when [Crop Zoom] is [ON].
The crop zoom ratio can be specified between the range of 120.00%
to 500.00%, and the grain-size can be set in units of 10.00% from the
OSD menu.
The variable range of the setting value of this item, the crop frame
size, [Crop H Position] and [Crop V Position] is shown below.
Crop Zoom Ratio Crop frame size
Variable range
Crop H
Position
Crop V
Position
120.00% 3200×1800 0 to 640 0 to 360
200.00% 1920×1080 0 to 1920 0 to 1080
300.00% 1280×720 0 to 2560 0 to 1440
400.00% 960×540 0 to 2880 0 to 1620
500.00% 768×432 0 to 3072 0 to 1728
This is only enabled when [Crop Mode] is set to [Crop(1080)] or
[Crop(720)].
Factory settings: 200.00%
130
Web screen configurations (continued)
To Next Page
Loading...
