EasyManua.ls Logo

Panasonic AW-UE100KP

Panasonic AW-UE100KP
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
More advanced operations
Manual shooting (→ page 41)
Manually adjusting the focus
Manually adjusting the iris
Manually adjusting the shutter speed
Manually adjusting the gain
Preset memories (→ page 42)
Up to 100 settings for the camera direction (panning and tilting), zoom,
focus, iris, gain up and white balance can be registered in the preset
memories, and called.
The number of settings that can be registered and called depends on
the type of wireless remote control (12 settings) or controller that is
used for operation.
White balance adjustment (→ pages 43 to 44)
This adjustment is performed to express the white accurately. Its
setting also has an effect on the color tones of the entire screen.
It must be performed when using the unit for the first time or when the
unit has not been used for a prolonged period.
Perform adjustment when the lighting conditions or brightness changes.
Once the white balance has been attained, no further adjustment is
required provided that the unit is going to be used under the same
conditions.
White balance adjustment is not possible in night mode.
Black balance adjustment (→ page 45)
This adjustment is performed to express the black accurately. Its
setting also has an effect on the color tones of the entire screen.
It must be performed when using the unit for the first time or when the
unit has not been used for a prolonged period.
It must be performed when the ambient temperature has changed
significantly and at the change of the seasons.
Once the black balance has been attained, no further adjustment is
required provided that the unit is going to be used under the same
conditions.
Black level (master pedestal) adjustment (→ page 46)
This adjustment is performed to align the black level (pedestal level) of
a multiple number of cameras.
Genlock adjustment (→ page 47)
This adjustment is performed to achieve phase alignment by applying
external synchronization (genlock) when a multiple number of cameras
will be used or when the unit will be used in combination with other
devices.
40

Table of Contents

Related product manuals