Specifications
Power requirements:
   12 V DC 
 (10.8 V to 13.2 V) (Supplied AC adaptor) 
42 V to 57 V DC 
 (PoE++ power supply)
Current consumption:
   3.0 A (Supplied AC adaptor) 
1.0 A (PoE++ power supply)
 indicates safety information.
GENERAL
Ambient operating temperature:
     0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: 
            –20 °C to 50 °C (–4 °F to 122 °F)
Ambient operating humidity: 
            20% to 90% (no condensation)
Mass:      Approx. 2.2 kg (4.84 lb) (excluding cable cover, 
mount bracket)
    Approx. 2.3 kg (5.06 lb) (including cable cover, 
excluding mount bracket)
Dimensions (W × H × D):
     169.2 mm×204.6 mm×170.6 mm  
(6-21/32 inches × 8-1/16 inches × 6-23/32 inches) 
( excluding protrusions, cable cover, mount bracket)
Finish:    AW-UE100WP/AW-UE100WPC/AW-UE100WE/
AW-UE100WED: Pearl white 
AW-UE100KP/AW-UE100KPC/AW-UE100KE/
AW-UE100KED: Black
Controller supported:
       AW-RP150,  AW-RP60
INPUT
Input connector
DC IN 12 V
G/L IN:   BBS (Black Burst Sync), tri-level sync supported 
75 Ω terminal (BNC×1)
AUDIO IN:       MIC/LINE input  
Compatible (SDI/HDMI/IP) 
AAC compatible (compatible with IP only) 
ø 3.5 mm stereo mini jack 
Input impedance: Approx. 10 kΩ (unbalanced)
•  During MIC input
Input level:   –40 dBV (0 dB=1 V/Pa, 1 kHz)
Plug-in power compatible, supply voltage:  
      2.5 V ± 0.5 V
•  During LINE input 
Input level:   –10 dBV
•  Input volume variable range: 
      –36 dB to +12 dB (3 dB step)
•  Embedded audio output level: 
   –12 dBFS
•  Sampling frequency: 
   48 kHz
•  Quantization bit rate:  
      24bit (SDI, HDMI), 16bit (IP)
OUTPUT
Video output
HDMI:      HDMI 2.0 connector 
4:2:2/10bit
•  HDCP is not supported.
•  Viera Link is not supported.
12G SDI OUT:     SMPTE 2082‑1/SMPTE292 standard/75 Ω (BNC×1)
3G SDI OUT:    SMPTE292/75 Ω (BNC×1)
•  Level-A/Level-B supported
INPUT/OUTPUT
Input/Output connector
LAN:        RJ-45 
LAN terminal for IP control and video transmission 
PoE++ power terminal (IEEE802.3bt compliant)
RS‑422:        CONTROL IN RS-422A (RJ-45)
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors: 1/2.5-type 4K MOS×1
Lens:         Motorized Optical 24× zoom, F1.8 to F4.0 
[f=4.12 mm (5/32 inches) to 98.9 mm 
(3-29/32 inches); 35 mm (1-3/8 inches) equivalent: 
25.0 mm (31/32 inches) to 600.0 mm (23-5/8 inches)] 
i.Zoom (UHD: 28×, FHD: 36×)
Conversion lens: Not supported
Angle of view range:
    Horizontal angle of view: 74.1° (wide) to 3.3° (tele)
            Vertical angle of view: 46.0° (wide) to 1.9° (tele)
            Diagonal angle of view: 81.8° (wide) to 3.8° (tele)
Optical filter:     Through, 1/4, 1/16, 1/64, IR through 
(IR through is used as “Night mode”)
Focus:  Switching between auto and manual
Focus distance:   Entire zooming range: 1200 mm (3.9 ft) 
Wide end: 100 mm (0.33 ft)
Color separation optical system:
    1MOS
Minimum illumination:
      3 lx (conditions: F1.8, 59.94p, 50 IRE, +42 dB, 
without accumulation)
Standard sensitivity:
      F4/2000 lx (When [Shooting Mode] is [Normal])
      F5.6/2000 lx (When [Shooting Mode] is [High Sens.])
Horizontal resolution:
     1500 TV lines Typ (Center area)
Gain selection:    Auto, 0 dB to 36 dB (1 dB steps)
•  Super Gain function installed: +37 dB to 42 dB
Frame mix:      Auto, 0 dB, 6 dB, 12 dB, 18 dB, 24 dB
•  This cannot be configured when the format is 
2160/29.97p, 2160/23.98p, 2160/24p, 2160/25p, 
1080/29.97p, 1080/23.98p(59.94i), 1080/29.97PsF, 
1080/23.98PsF, 1080/25p, 1080/25PsF.
174