Crop Marker [Off, YL, G, MG, YL+G, YL+MG, G+MG,
YL+G+MG]
Makes the settings for the crop frame displayed for images output to
12G SDI OUT, 3G SDI OUT, HDMI and LAN connectors.
Off Crop frame is not displayed.
YL Only a yellow crop frame is displayed.
G Only a green crop frame is displayed.
MG Only a magenta crop frame is displayed.
YL+G Yellow and green crop frames are displayed.
YL+MG Yellow and magenta crop frames are displayed.
G+MG Green and magenta crop frames are displayed.
YL+G+MG Yellow, green, and magenta crop frames are
displayed.
This is only enabled when [UHD Crop] is set to [Crop(1080)] or
[Crop(720)].
Return
Return to the previous menu level.
UHD Crop 2/2 screen
UHD Crop 2/2
Crop Out YL
Crop Adjust YL
Crop H Position 960
Crop V Position 540
Crop Zoom Ratio 200.00%
Return
Crop Out [YL, G, MG]
Makes the settings for the crop frame for images output to 3G SDI
OUT and LAN (NDI, and H.264/H.265/M-JPEG) connectors.
YL Output the yellow crop frame images.
G Output the green crop frame images.
MG Output the magenta crop frame images.
This is only enabled when [UHD Crop] is set to [Crop(1080)] or
[Crop(720)].
<NOTE>
• The color frame specified in [Crop Out] will be a deeper shade when
compared to other colors used for frames.
Crop Adjust [YL, G, MG]
Make selections for the crop frame to adjust positioning.
YL Make position adjustments for the yellow crop frame.
G Make position adjustments for the green crop frame.
MG Make position adjustments for the magenta crop
frame.
This is only enabled when [UHD Crop] is set to [Crop(1080)] or
[Crop(720)].
<NOTE>
• The color frame specified in [Crop Adjust] will be thicker when
compared to other color frames.
Crop H Position [0 to 3072]
Make settings for the position in the horizontal direction for the crop
frame specified in [Crop Adjust].
The variable range is 0 to 1920 when [UHD Crop] is [Crop(1080)]
and [Crop Zoom] is [Off], with 0 as the left edge and 1920 as the right
edge, and only even numbers can be set.
The variable range is 0 to 2560 when [UHD Crop] is [Crop(720)] and
[Crop Zoom] is [Off], with 0 as the left edge and 2560 as the right
edge, and only even numbers can be set.
The variable range when [Crop Zoom] is [On] is different depending
on the setting value of [Crop Zoom Ratio], with the variable range
being 0 to 3072 when the [Crop Zoom Ratio] is 500.00%, and only
even numbers can be set.
This is only enabled when [UHD Crop] is set to [Crop(1080)] or
[Crop(720)].
Crop V Position [0 to 1728]
Make settings for the position in the vertical direction for the crop
frame specified in [Crop Adjust].
The variable range is 0 to 1080 when [UHD Crop] is [Crop(1080)] and
[Crop Zoom] is [Off], with 0 as the upper edge and 1080 as the lower
edge.
The variable range is 0 to 1440 when [UHD Crop] is [Crop(720)] and
[Crop Zoom] is [Off], with 0 as the upper edge and 1440 as the lower
edge.
The variable range when [Crop Zoom] is [On] is different depending
on the setting value of [Crop Zoom Ratio], with the variable range
being 0 to 1728 when the [Crop Zoom Ratio] is 500.00%.
This is only enabled when [UHD Crop] is set to [Crop(1080)] or
[Crop(720)].
70 71
Camera menu items (continued)