To Next PageTo Next PageHow to fix picture is flipped vertically on Panasonic Security Camera?
If the Panasonic Security Camera picture is flipped vertically, ensure that the stand-alone (Desktop) installation setting has been selected correctly.
What to do if the status display lamp does not light on Panasonic Security Camera?
If your Panasonic Security Camera's status display lamp isn't lighting up, it might be because the [Status Lamp] setting is set to [Disable]. To resolve this, change the setting to [Enable].
How to fix images blurry on Panasonic AW-UE150KP Security Camera?
If the Panasonic Security Camera images are blurry, ensure that the focus is properly adjusted.
What to do if the subject is not brought into focus during zooming on Panasonic AW-UE150KP?
If the subject is not brought into focus during zooming when the manual setting is used for the focus on your Panasonic Security Camera, adjust the focus at the Tele end first, where the focusing accuracy is higher, and then proceed with the zooming. Note that under some operating conditions, it may be hard to bring subjects into focus.
How to fix something is wrong with the coloring of the pictures on Panasonic Security Camera?
If something is wrong with the coloring of the pictures on your Panasonic Security Camera, activate the ATW (Auto tracking white adjustment) function. Note that in some situations, the proper colors may not be reproduced using the ATW function.
Why Panasonic AW-UE150KP Security Camera cannot operate using the controller?
If you cannot operate the Panasonic Security Camera using the controller, ensure the unit is properly connected to the controller. It might also be necessary to upgrade the controller's software to support the unit.
What to do if Panasonic AW-UE150KP cannot operate?
If you cannot operate your Panasonic Security Camera, ensure the power is on. If the status display lamp is off or orange, the unit is not powered on. The safe mode function might be activated, or limiter functions may have been set. Also, verify that you have selected the correct unit to operate.
Why Panasonic AW-UE150KP turns in the opposite direction?
If the Panasonic Security Camera is turning in the opposite direction to the one operated, check if the stand-alone (Desktop) installation setting has been selected correctly. If the unit is connected to a controller, the reversal setting may have been established there.
Why my Panasonic AW-UE150KP Security Camera cannot operate using the wireless remote control?
If you are unable to operate your Panasonic Security Camera using the wireless remote control, first check if the remote control's batteries are depleted or installed incorrectly. Replace the batteries if needed. Next, verify that the IR ID switches are correctly configured. Finally, check for any nearby fluorescent lights or plasma monitors that might be interfering with the wireless remote control signal.
What to do if Panasonic Security Camera has no power?
If your Panasonic Security Camera has no power, make sure the AC cable of the external DC power supply is securely connected to the AC outlet and that the power plug of the external DC power supply is connected properly. Also, ensure the LAN cable is securely connected to the LAN connector for IP control. If using PoE++, verify the network cable is properly connected. Power may not be supplied if the total power limit is exceeded on power supply devices with multiple PoE++ terminals. If connected to a controller, ensure it is properly connected. If operating from a wireless remote, verify its functionality.
General| Camera Type | PTZ Camera |
|---|---|
| Optical Zoom | 20x |
| Digital Zoom | 10x |
| Video Output | HDMI, 3G-SDI, IP |
| Horizontal Resolution | 1000 TV Lines |
| Pan/Tilt | Pan: ±170°, Tilt: -30° to +90° |
| IP Control | Yes |
| Pan/Tilt Range | Pan: ±170°, Tilt: -30° to +90° |
| Effective Pixels | 8.29 MP |
| Network Protocols | RTSP, RTMP |
| Power Supply | AC 100 V to 240 V |
| ND Filter | 1/4, 1/16, 1/64 |
| Shutter Speed | 1/1 to 1/10, 000 sec |
| Audio Input | 3.5 mm stereo mini-jack |
| Image Sensor | 1/2.5-type MOS sensor |
| Minimum Illumination | 0.5 lx (F1.8, 50 IRE, 1/30 sec) |
Essential warnings and cautions for safe operation, covering risks of electric shock, moisture, and proper handling.
Covers environmental conditions, proper lighting, handling, and avoiding damage.
Setting up the initial user account and installing the necessary viewer software.
Procedures for turning the unit on and off using various control methods.
Solutions for problems related to camera movement and remote control operation.
Solutions for issues with picture display, color, and menu visibility.
Detailed steps for manually adjusting focus, iris, shutter speed, and gain.
Procedures for setting and adjusting white balance modes (ATW, AWB, presets).
Adjusting image parameters like brightness, color, detail, and gamma.
Detailed settings for white balance modes, color temperature, and gain adjustments.
Configuration for video outputs (SDI, HDMI, MONI) and IP streaming.
Accessing and controlling the camera via a web browser on a PC.
Detailed setup for IP addressing, DNS, DHCP, and other network parameters.
Solutions for problems related to power, unit operation, and controller connectivity.
Troubleshooting steps for problems like no pictures, distorted images, or color issues.
Technical details on imaging sensors, lens, illumination, resolution, and sensitivity.
