To Next PageTo Next PageWhat to do if the status display lamp does not light on Panasonic Security Camera?
If your Panasonic Security Camera's status display lamp isn't lighting up, it might be because the [Status Lamp] setting is set to [Disable]. To resolve this, change the setting to [Enable].
What to do if I cannot access my Panasonic AW-UE150KP from a web browser?
If the [LINK] LED of the LAN connector for IP control is not lit, it means that something is wrong with the connection to the LAN or that the network at the connection destination is not working properly. Check the LAN cable for defective contacts, and check the wiring.
What to do if I cannot operate Panasonic AW-UE150KP Security Camera using the controller?
If you cannot operate your Panasonic Security Camera using the controller, verify that the unit is properly connected to the controller. It may also be necessary to upgrade the controller's version to ensure it supports the unit.
Why won't my Panasonic AW-UE150KP Security Camera operate with the remote or controller?
If you're experiencing issues operating your Panasonic Security Camera with either the wireless remote control or the controller, first ensure the power is on. If the status display lamp is off or lights up orange, the unit's power is not on. Also, check if the safe mode function has been activated, or if limiter functions have been set. Finally, make sure the unit you intend to operate has been properly selected.
Why does the authentication screen appear repeatedly on my Panasonic Security Camera?
If the authentication screen appears repeatedly on your Panasonic Security Camera, it might be because the user name or password has been changed. Close the web browser and initiate access to the unit again. Alternatively, the method for user authentication might have been changed. In this case, close the web browser and initiate access again.
What to do if no pictures are displayed on Panasonic AW-UE150KP?
If no pictures are displayed or the pictures are disturbed on your Panasonic Security Camera, first check if the unit has been properly connected to the other connected devices. Also, confirm that the correct unit has been selected if the system is configured to switch the picture when the unit to be operated is selected. Ensure that the image signal setting has been correctly selected and that external sync signals supported by the video signal format are being input.
Why images are not displayed on Panasonic Security Camera?
For Windows: Is the plug-in viewer software installed? If [Check for newer versions of stored pages] is not set to [Every time I visit the webpage] in the temporary Internet file settings, IP images may not appear in the live screen [Live].
What to do if the menu screen is displayed on Panasonic Security Camera?
If the menu screen is displayed on your Panasonic Security Camera, exit the camera menu.
How to troubleshoot no power on Panasonic AW-UE150KP Security Camera?
If no power is supplied to the Panasonic Security Camera, make sure the AC cable of the external DC power supply is securely connected to the AC outlet and that the power plug of the external DC power supply is connected properly. Verify the LAN cable is securely connected to the LAN connector for IP control. Ensure the network cable for the PoE++ compatible power supply device and the unit are connected properly. Note that power may not be supplied if the total power limit is exceeded on power supply devices that allow connections to multiple PoE++ terminals. If the unit is connected to the controller, ensure it has been connected properly. Consider the power source when performing operations from a wireless remote control.
Why the tally lamps do not light on my Panasonic AW-UE150KP Security Camera?
If the Panasonic Security Camera tally lamps do not light, ensure that the [Tally] setting is not set to [Disable]. If it is, the unit's tally lamp will not light.
General| Camera Type | PTZ Camera |
|---|---|
| Optical Zoom | 20x |
| Digital Zoom | 10x |
| Video Output | HDMI, 3G-SDI, IP |
| Horizontal Resolution | 1000 TV Lines |
| Pan/Tilt | Pan: ±170°, Tilt: -30° to +90° |
| IP Control | Yes |
| Pan/Tilt Range | Pan: ±170°, Tilt: -30° to +90° |
| Effective Pixels | 8.29 MP |
| Network Protocols | RTSP, RTMP |
| Power Supply | AC 100 V to 240 V |
| ND Filter | 1/4, 1/16, 1/64 |
| Shutter Speed | 1/1 to 1/10, 000 sec |
| Audio Input | 3.5 mm stereo mini-jack |
| Image Sensor | 1/2.5-type MOS sensor |
| Minimum Illumination | 0.5 lx (F1.8, 50 IRE, 1/30 sec) |
Essential warnings and cautions for safe operation, covering risks of electric shock, moisture, and proper handling.
Covers environmental conditions, proper lighting, handling, and avoiding damage.
Setting up the initial user account and installing the necessary viewer software.
Procedures for turning the unit on and off using various control methods.
Solutions for problems related to camera movement and remote control operation.
Solutions for issues with picture display, color, and menu visibility.
Detailed steps for manually adjusting focus, iris, shutter speed, and gain.
Procedures for setting and adjusting white balance modes (ATW, AWB, presets).
Adjusting image parameters like brightness, color, detail, and gamma.
Detailed settings for white balance modes, color temperature, and gain adjustments.
Configuration for video outputs (SDI, HDMI, MONI) and IP streaming.
Accessing and controlling the camera via a web browser on a PC.
Detailed setup for IP addressing, DNS, DHCP, and other network parameters.
Solutions for problems related to power, unit operation, and controller connectivity.
Troubleshooting steps for problems like no pictures, distorted images, or color issues.
Technical details on imaging sensors, lens, illumination, resolution, and sensitivity.
