Panasonic AW-UE150KP User Manual (English)

Questions and Answers:

T
thomas47Aug 25, 2025
Why my Panasonic AW-UE150KP Security Camera cannot operate using the wireless remote control?
- O
  olivia97Aug 26, 2025
  If you are unable to operate your Panasonic Security Camera using the wireless remote control, first check if the remote control's batteries are depleted or installed incorrectly. Replace the batteries if needed. Next, verify that the IR ID switches are correctly configured. Finally, check for any nearby fluorescent lights or plasma monitors that might be interfering with the wireless remote control signal.
N
Nancy FoxAug 26, 2025
Why Panasonic AW-UE150KP turns in the opposite direction?
- T
  Thomas NewmanAug 26, 2025
  If the Panasonic Security Camera is turning in the opposite direction to the one operated, check if the stand-alone (Desktop) installation setting has been selected correctly. If the unit is connected to a controller, the reversal setting may have been established there.
T
Thomas AustinAug 26, 2025
What to do if Panasonic AW-UE150KP cannot operate?
- N
  Nicole CampbellAug 26, 2025
  If you cannot operate your Panasonic Security Camera, ensure the power is on. If the status display lamp is off or orange, the unit is not powered on. The safe mode function might be activated, or limiter functions may have been set. Also, verify that you have selected the correct unit to operate.
R
Rebecca VillanuevaAug 27, 2025
Why Panasonic AW-UE150KP Security Camera cannot operate using the controller?
- J
  Jeffrey ThomasAug 27, 2025
  If you cannot operate the Panasonic Security Camera using the controller, ensure the unit is properly connected to the controller. It might also be necessary to upgrade the controller's software to support the unit.
A
Austin RuizAug 27, 2025
How to fix the tally lamps do not light on Panasonic AW-UE150KP Security Camera?
- M
  Megan WestAug 27, 2025
  If the tally lamps on your Panasonic Security Camera do not light up, check if the [Tally] setting is set to [Disable]. If it is, change the setting to [Enable] to activate the tally lamp.
C
Craig Shaw MDAug 27, 2025
Why are the images distorted on my Panasonic AW-UE150KP?
- J
  Jessica WilliamsAug 27, 2025
  If the images from your Panasonic Security Camera appear distorted, it could be due to congestion on the transmission path, preventing proper transmission. Also, distortion can occur if video packet shuffling happens during transmission.
I
ichungAug 28, 2025
How to troubleshoot a Panasonic AW-UE150KP Security Camera with no power?
- K
  Kristina LeeAug 28, 2025
  If your Panasonic Security Camera is not powering on, ensure the AC cable of the external DC power supply is securely connected to the AC outlet and that the power plug of the external DC power supply is properly connected. Also, verify that the LAN cable is securely connected to the LAN connector for IP control, and that the network cable for the PoE++ compatible power supply device is properly connected. Power may not be supplied if the total power limit is exceeded on power supply devices. Check the connection to the controller, if applicable, and ensure proper operation when using a wireless remote control.
M
Mark WilliamsAug 28, 2025
What to do if the status display lamp does not light on Panasonic Security Camera?
- M
  marcuslaneAug 28, 2025
  If your Panasonic Security Camera's status display lamp isn't lighting up, it might be because the [Status Lamp] setting is set to [Disable]. To resolve this, change the setting to [Enable].
A
Ashley HuberAug 29, 2025
Why can't I operate my Panasonic AW-UE150KP Security Camera with the remote control?
- K
  Kenneth BartlettAug 29, 2025
  If you cannot operate your Panasonic Security Camera using the wireless remote control, ensure the batteries haven't run down or been installed with reversed polarities. If the status display lamp doesn't blink when operating the remote near the signal light-sensing area, replace the batteries. Also, check if the IR ID switches are correctly set. Finally, consider whether a nearby fluorescent light or plasma monitor is interfering with the wireless remote control signal.
E
Emily FaulknerAug 29, 2025
What to do if I cannot operate Panasonic AW-UE150KP Security Camera using the controller?
- N
  Nicholas RobinsonAug 29, 2025
  If you cannot operate your Panasonic Security Camera using the controller, verify that the unit is properly connected to the controller. It may also be necessary to upgrade the controller's version to ensure it supports the unit.

Panasonic AW-UE150KP Specifications

General

Camera Type	PTZ Camera
Optical Zoom	20x
Digital Zoom	10x
Video Output	HDMI, 3G-SDI, IP
Horizontal Resolution	1000 TV Lines
Pan/Tilt	Pan: ±170°, Tilt: -30° to +90°
IP Control	Yes
Pan/Tilt Range	Pan: ±170°, Tilt: -30° to +90°
Effective Pixels	8.29 MP
Network Protocols	RTSP, RTMP
Power Supply	AC 100 V to 240 V
ND Filter	1/4, 1/16, 1/64
Shutter Speed	1/1 to 1/10, 000 sec
Audio Input	3.5 mm stereo mini-jack
Image Sensor	1/2.5-type MOS sensor
Minimum Illumination	0.5 lx (F1.8, 50 IRE, 1/30 sec)