Panasonic AW-UE150KP

Questions and Answers:

S
Stacy JonesSep 2, 2025
What to do if no pictures are displayed or the pictures are disturbed on Panasonic AW-UE150KP Security Camera?
- R
  Richard StewartSep 2, 2025
  If images are not displayed on your Panasonic Security Camera, ensure that the unit has been connected properly to the other connected devices. If the system is configured to switch the picture when the unit to be operated is selected, verify that the correct unit has been selected. Confirm that the image signal setting has been selected correctly and that external sync signals supported by the set video signal format are being input.
S
Shaun HawkinsSep 3, 2025
Why does Panasonic AW-UE150KP Security Camera turn in the opposite direction?
- N
  nicholas49Sep 3, 2025
  If the Panasonic Security Camera unit turns in the opposite direction to the one operated, check if the stand-alone (Desktop) installation setting has been selected correctly. If the unit is connected to the controller, the reversal setting may have been established at the controller.
B
Brittany BowersSep 3, 2025
Why does authentication screen appear repeatedly on Panasonic AW-UE150KP Security Camera?
- D
  Deborah NelsonSep 3, 2025
  If the Panasonic Security Camera authentication screen appears repeatedly, it may be because the user name or password has been changed, or the method for user authentication has been changed.
Z
Zachary JonesSep 3, 2025
Why are the pictures too light or too dark on my Panasonic AW-UE150KP Security Camera?
- M
  Megan JohnsonSep 4, 2025
  If the Panasonic Security Camera pictures are too light or too dark, either select the auto setting for the iris or select the manual setting and adjust the iris manually. Also, if the analog video signal cables are too long, it can cause signal attenuation, resulting in dark pictures.
L
Logan MccarthySep 4, 2025
How to fix no auto focusing on Panasonic AW-UE150KP Security Camera?
- N
  Nicole CarsonSep 4, 2025
  If the Panasonic Security Camera is not auto focusing, ensure that the focus is set to auto, as auto focusing is initiated as soon as the focus is set to auto. Note that in some situations, it may be hard to focus at the auto setting.
J
John OconnellSep 4, 2025
Why are images in black and white on my Panasonic Security Camera?
- A
  Angela LongSep 5, 2025
  If the Panasonic Security Camera images are in black and white, the unit may be in night mode. In night mode, output will be in black and white.
B
Bruce RobersonSep 5, 2025
How to fix picture is flipped vertically on Panasonic Security Camera?
- J
  Joshua AllenSep 5, 2025
  If the Panasonic Security Camera picture is flipped vertically, ensure that the stand-alone (Desktop) installation setting has been selected correctly.
W
willispatriciaSep 5, 2025
Why it is difficult to view the menu screens on Panasonic AW-UE150KP Security Camera?
- S
  stevenscindySep 6, 2025
  If it is difficult to view the menu screens on your Panasonic Security Camera, it may be due to the HDMI monitor you are using, which could be causing certain symptoms.
I
iwhiteSep 6, 2025
What to do if the subject is not brought into focus during zooming on Panasonic AW-UE150KP?
- A
  Andrea SimmonsSep 6, 2025
  If the subject is not brought into focus during zooming when the manual setting is used for the focus on your Panasonic Security Camera, adjust the focus at the Tele end first, where the focusing accuracy is higher, and then proceed with the zooming. Note that under some operating conditions, it may be hard to bring subjects into focus.
R
Robert TylerSep 6, 2025
How to fix images blurry on Panasonic AW-UE150KP Security Camera?
- B
  Brenda ManningSep 7, 2025
  If the Panasonic Security Camera images are blurry, ensure that the focus is properly adjusted.

Panasonic AW-UE150KP Specifications

General

Camera Type	PTZ Camera
Optical Zoom	20x
Digital Zoom	10x
Video Output	HDMI, 3G-SDI, IP
Horizontal Resolution	1000 TV Lines
Pan/Tilt	Pan: ±170°, Tilt: -30° to +90°
IP Control	Yes
Pan/Tilt Range	Pan: ±170°, Tilt: -30° to +90°
Effective Pixels	8.29 MP
Network Protocols	RTSP, RTMP
Power Supply	AC 100 V to 240 V
ND Filter	1/4, 1/16, 1/64
Shutter Speed	1/1 to 1/10, 000 sec
Audio Input	3.5 mm stereo mini-jack
Image Sensor	1/2.5-type MOS sensor
Minimum Illumination	0.5 lx (F1.8, 50 IRE, 1/30 sec)