Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images.
Factory settings: On
Master Detail [–31 to +31]
Adjust the contour correction level (master).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work.
This is only enabled when [Detail] is set to [On].
Factory settings: 15
V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Frequency [–7 to +7]
Set the boost frequency of detail.
–7: Low frequency
to
+7: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Level Depend. [–7 to +7]
When the detail of bright signals are emphasized, the detail of dark
parts are compressed.
The larger the [Level Depend.] setting, the more detail of bright parts
is compressed.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Knee Aperture Level [0 to 5]
Set the detail level of very bright parts.
This is only enabled when [Detail] is set to [On].
Factory settings: 2
Detail Gain(+) [–31 to +31]
Set the detail level of the plus direction (direction to be made
brighter).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Gain(–) [–31 to +31]
Set the detail level of the minus direction (direction to be made
darker).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Skin Detail [Off, On]
This function smooths skin and produces a more beautiful image.
This is only enabled when [Detail] is set to [On].
Factory settings: Off
Skin Detail Effect [0 to 31]
The skin of human subjects appears smoother the larger the setting
value.
This is only enabled when [Detail] is set to [On] and [Skin Detail] is set
to [On].
Factory settings: 16
DownCon Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images
down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
Factory settings: On
DC. Master Detail [–31 to +31]
Adjust the contour correction level (master) for images down-
converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: –20
DC. Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work for images down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 15
DC. V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction for images
down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 7
DC. Detail Frequency [–2 to +2]
Set the boost frequency of detail for images down-converted from 4K
to HD.
–2: Low frequency
to
+2: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 0
DC. Level Depend. [–7 to +7]
The larger the setting for images down-converted from 4K to HD, the
more detail of bright parts is compressed.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 0
DC. Knee Aperture Level [0 to 5]
Set the detail level of very bright parts in images down-converted from
4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 2
104 105
Web screen configurations (continued)
To Next Page
Loading...
