Panasonic AW-UE150WP

IP Network screen
IP Network
IP Address
192.168.0.10
Subnet Mask
255.255.255.0
Default Gateway
192.168.0.1
Set Execute
Return
IP Address
Set the IP address for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Subnet Mask
Set the subnet mask for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Default Gateway
Set the default gateway for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Set Execute
Apply the values set in [IP Address], [Subnet Mask], and [Default
Gateway] to this unit.
Return
Return to the previous menu level.
<NOTE>
• The IP Network cannot be changed while the DHCP function is On.
• If the DHCP function is not to be used, change the setting for
[DHCP] to [Off] in the network settings screen of your web browser.
(→ page 115)

Concerning initialization
When [Initialize] is selected on the [Maintenance] screen, the [Initialize]
screen appears.
Initialize screen
Initialize
Do you want to initialize
Menu settings?
CANCEL
O.K.
• When the cursor is moved to [O.K.] on the [Initialize] screen and the
setting is entered, the [Menu settings initialized] screen is displayed for
5 seconds, and the camera settings are restored to the settings which
were established when the camera was purchased.
<NOTE>
• The [Format] and [Frequency] settings (→ page 54) are not
initialized.
• The network settings are not initialized.
• The [AWB] and [ABB] adjustment values are not initialized.
Menu settings initialized screen
Menu settings
initialized
• When the cursor is moved to [CANCEL] on the [Initialize] screen
and the setting is entered, the [Menu settings unchanged] screen is
displayed for 5 seconds, the initialization operation is not performed,
and the [Maintenance] screen returns to the display.
Menu settings unchanged screen
Menu settings
unchanged
66
Camera menu items (continued)