Panasonic AW-UE150WP

15. Scene [Scene]
[Scene1] [Scene2]
[Scene3] [Scene4]
Click Scene1-Scene4 to switch the shooting
mode.
Display button for scene expansion panel
The [Scene1], [Scene2], [Scene3], and [Scene4]
buttons for scene files are displayed.
The display changes to [–] while these are
displayed, and they stop being displayed when
this is pressed again.
<NOTE>
• The [Scene1], [Scene2], [Scene3] and [Scene4] buttons are not
displayed immediately after the live screen [Live] is displayed. They
are displayed when the [Display button for scene expansion panel]
is pressed.
16. Full-screen display button
Display the image in full-screen mode.
To return to the live screen [Live], press the [Esc] key on
the personal computer while the image is displayed in
full-screen mode.
The aspect ratio of the displayed image will be adjusted
according to the monitor size.
17. Snapshot button
Capture a snapshot (single still image), and display it in a
separate window.
<NOTE>
• The following settings may be necessary.
In the Internet Explorer menu bar, click [Tools] - [Internet Options] -
[Security] tab, select [Trusted Sites], and then click [Sites]. Register
the camera’s address under [Websites] in the window that appears.
• Depending on the network environment, for example, if snapshot
capture takes longer than a certain amount of time, the image may
not appear.
• If [JPEG transmission(1)] ‑ [JPEG transmission(3)] (→ page 94)
are all set to [Off], the image captured with the snapshot button will
be black.
18. Camera title display area
The name for the unit configured in [Camera title] in [Live page] in the
Basic screen [Basic] (→ page 92) appears.
19. Gain [Gain]
Increase the gain of the images.
Decrease the gain of the images.
<NOTE>
• The current setting is displayed in the middle of the button.
20. White balance [WB]
Switch the white balance in the order [AWB A], [AWB B],
[3200K], [5600K], [VAR], [ATW].
Switch the white balance in the order [AWB A], [ATW],
[VAR], [5600K], [3200K], [AWB B].
[AWB]
Automatic white balance (AWB) is executed and the white
balance is reset.
[ABB]
Automatic black balance (ABB) is executed and the black
balance is reset.
<NOTE>
• The current setting is displayed in the middle of the button.
21. Shutter [Shutter]
Switch the shutter mode in the order [Off], [Step],
[Synchro], [ELC].
Switch the shutter mode in the order [ELC], [Synchro],
[Step], [Off].
<NOTE>
• The current setting is displayed in the middle of the button.
22. ND filter [ND]
Switch the transmittance of the ND filter in the order
[Through], [1/4 ND], [1/16 ND], [1/64 ND].
Switch the transmittance of the ND filter in the order
[1/64 ND], [1/16 ND], [1/4 ND], [Through].
<NOTE>
• The current setting is displayed in the middle of the button.
• ND filter switching is not possible in night mode.
23. RTMP Streaming
(Streaming stopped)
(Streaming)
Streaming transmission starts to the RTMP server
that was pre-registered.
The button turns red during transmission, and
transmission stops when the button is clicked
again.
<NOTE>
• This button can be used only when [Streaming mode] is [RTMP].
24. Button for switching the personal computer screen
Display the screen for mobile terminals.
For details, refer to “Displaying the web screen using a
mobile terminal” (→ page 134).
<NOTE>
• This button is displayed only when displaying on a mobile terminal.
82
Web screen operations (continued)