Panasonic AW-UE150WP

z H.265
Set H.265 image settings.
The setting is confirmed with the [Set] button.
<NOTE>
• H.265 format images cannot be displayed in the live screen [Live] of
the unit.
• Use external devices and software compatible with H.265 images to
display H.265 images.
H.265 transmission [On, Off]
Whether to transmit the H.265 images is set here.
Factory settings: On
Image capture size
The H.265 image resolution is displayed.
H.265 images are fixed at 3840×2160.
Frame rate [30fps, 25fps, 24fps]
Set the frame rate for H.265 images.
59.94Hz/29.97Hz 30fps
50Hz/25Hz 25fps
24/23.98Hz 24fps
Factory settings: 30fps
Max bit rate(per client)
[8192kbps, 12800kbps, 25600kbps, 51200kbps, 76800kbps]
Specify the H.265 bit rate per client.
Factory settings: 25600kbps
Transmission type
The same as H.264 Transmission type (→ page 96).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 96).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 96).
Multicast address
The same as H.264 Multicast address (→ page 96).
Multicast port
The same as H.264 Multicast port (→ page 96).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 96).
96 97
Web screen configurations (continued)