Panasonic AW-UE150WP

z NDI|HX
Make NDI|HX transmission settings.
The setting is confirmed with the [Set] button.
NDI|HX stream
NDI|HX transmission [On, Off]
Whether to transmit the NDI|HX images is set here.
Factory settings: On
Internet mode(Over HTTP) [On, Off]
This cannot be configured on [NDI|HX stream] screen.
Image capture size [1920×1080, 1280×720]
Select the resolution for NDI|HX images.
Factory settings: 1920×1080
Transmission priority
This cannot be configured on [NDI|HX stream] screen.
Frame rate [5fps, 12.5fps, 15fps, 25fps, 30fps, 50fps, 60fps]
Set the frame rate for NDI|HX images.
59.94Hz 5fps/15fps/30fps/60fps
50Hz 5fps/12.5fps/25fps/50fps
Factory settings:
For 59.94Hz: 60fps
For 50Hz: 50fps
<NOTE>
• When the frame frequency is 24/23.98Hz, you cannot set to the
NDI|HX mode.
• [60fps(50fps)] cannot be selected when the video format is
[29.97p(25p)].
Max bit rate(per client)
[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps,
4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps,
14336kbps, 16384kbps, 20480kbps, 24576kbps]
Specify the NDI|HX bit rate per client.
Factory settings: 10240kbps
<NOTE>
• The NDI|HX bit rate setting range depends on the resolution.
Image quality
This cannot be configured on [NDI|HX stream] screen.
Transmission type
The same as H.264 Transmission type (→ page 96).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 96).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 96).
Multicast address
The same as H.264 Multicast address (→ page 96).
Multicast port
The same as H.264 Multicast port (→ page 96).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 96).
98 99
Web screen configurations (continued)