Operating Instructions
Multi‑format support
• You can switch between the following formats via the camera
menus or a web browser.
[4K format (only HDMI output supported)]
2160/59.94p, 2160/50p, 2160/29.97p
*
1
, 2160/25p
*
1
, 2160/24p
*
1
,
2160/23.98p
*
1
[HD format (SDI supported)]
1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/29.97p
*
1
,
1080/25p
*
1
, 1080/23.98p
*
2
, 1080/29.97PsF, 1080/25PsF,
1080/23.98PsF, 1080/24p
*
1
, 1080/23.98p
*
1
, 720/59.94p, 720/50p
[HD format (HDMI supported)]
1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/29.97p
*
1
,
1080/25p
*
1
, 1080/23.98p
*
3
, 1080/24p
*
1
, 1080/23.98p
*
1
,
720/59.94p, 720/50p
*
1
Native output
*
2
OVER 59.94i output (your monitor may recognize the signal as
59.94i).
*
3
OVER 59.94p output (your monitor may recognize the signal
as 59.94p).
1/2.5‑type 4K MOS sensor and high‑
performance 24x zoom lens featured
• The latest 1/2.5‑type 4K MOS sensor and DSP (Digital Signal
Processor) are incorporated. High‑quality pictures are obtained by
video processing in many different kinds of ways.
• In addition to its optical 24x zoom lens, the unit comes with a 10x
digital zoom to achieve high‑quality images that overflow with
ambiance. Zoom up to 36x is possible (up to 28x in 4K mode)
while maintaining the picture quality with the use of iZoom.
• A dynamic range stretcher (DRS) function that compensates for
overexposure and loss of dark detail and a digital noise reduction
(DNR) function for minimizing image lag even in dark locations
and shooting scenes clearly are incorporated to reproduce clean
and clear images in a wide range of applications.
• Even if the camera has to be installed in a limited space, a wide
range can be covered due to the possibility of wide‑angle shooting
across 74.1° horizontally.
Easy operation of unit enabled by its
integration with a high‑performance pan‑tilt
head unit
• Operations at the high speed of 180°/s
• Wide rotational angles with a panning range of ±175° and a tilting
range from –30° to 90°
• Quiet operation with noise levels of NC25 or less
• Storage of up to 100 positions in the preset memory
(The number of preset memories that can be used varies from one
controller to another.)
Built‑in night mode
• The unit supports infrared shooting.
By exposing subjects to infrared rays, shooting under ordinarily
difficult low‑light conditions is possible.
(Image output will be in black and white.)
• The iris will be fixed at open.
Supports optical image stabilization (O.I.S.)
• Image stabilization is implemented if shaking of the unit is
detected, thus reducing shaking of the images.
Optical image stabilization means less image deterioration,
making highly precise vibration mitigation possible.
IP image output functions
• The unit is equipped with image compression and IP transmission
LSI capabilities. Output at a maximum of 60 frames each second
is possible at full HD picture quality.
• Operation with IP control allows for a wide range of applications,
such as controlling the camera from remote locations.
High degree of compatibility with Panasonic’s
currently available controllers, enabling a
flexible system to be put together
• A maximum of five units can be operated by serial control from
one of Panasonic’s currently available controllers (AW‑RP150,
AW‑RP60).
The unit can also be used together with the cameras and pan‑tilt
head unit systems currently available from Panasonic Connect
Co., Ltd. so that an existing system can be used to advantage to
put together a system that is even more flexible.
<NOTE>
• It may be necessary to upgrade the version of the controllers
in order to support the unit. For details on upgrading, visit the
support page on the following website.
https://pro‑av.panasonic.net/
The maximum distances between the units and controller is
1000 meters (3280 ft). (when serial control is exercised)
Use of an external device or some other means must be
provided separately in order to extend the video signal
connections.
Easy construction of systems thanks to
integrated design used for pan‑tilt head,
camera and lens
• By integrating the camera, lens and pan‑tilt head into a single unit,
it is now easier to construct systems.
Use of easy‑to‑operate wireless remote control
(optional accessory) is possible
• A wireless remote control capable of operating up to four units can
be used.
It can easily be used to set the various functions or switch
between them while viewing the menu screens.
Flexible camera layout enabled by simple
connection and installation
• This unit features excellent connectivity and installability thanks
to the IP control; a lightweight main unit, and the turn‑lock
mechanism, which enables the user to install it on his or her own
(only when used indoors).
<NOTE>
• Bear in mind that this unit is designed to be used indoors only:
It cannot be used outdoors.
While including a 4K‑compatible or different
kinds of interface, the unit still has the same
installation footprint as previous models
• The unit maintains the compact installation footprint of previous
models.
Easy connections and settings courtesy of IP
control
• Up to two hundred units can be operated by IP connection from a
Panasonic controller (AW‑RP150, AW‑RP60).
(The maximum length of the LAN cables is 100 meters (328 ft).)
• Network connection with AW‑RP150 or AW‑RP60 requires setup
of an initial account. (→ page 59)
When an initial account is not set up, AW‑RP150 or AW‑RP60 can
detect but cannot control this unit.
Features
42
To Next Page
Loading...
