To Next PageTo Next PageWhy Panasonic AW-UE80WP picture is flipped vertically?
If the picture on your Panasonic Digital Camera is flipped vertically, check if the stand-alone (Desktop) installation setting has been selected correctly.
Why is my Panasonic Security Camera not auto focusing?
If your Panasonic Security Camera is not auto focusing, check if the focus is set to manual. Auto focusing starts as soon as the focus is set to auto. In some situations, it may be hard to focus at the auto setting, so select the manual setting and focus manually.
Why does my Panasonic AW-UE80WP turn in the opposite direction to the one operated?
If your Panasonic Digital Camera turns in the opposite direction to the one operated, check if the stand-alone (Desktop) installation setting has been selected correctly. If the unit is connected to a controller, the reversal setting may have been established at the controller.
Why Panasonic Security Camera turns in the opposite direction?
If the Panasonic Security Camera is turning in the opposite direction to the one operated, check if the stand-alone (Desktop) installation setting has been selected correctly. If the unit is connected to a controller, the reversal setting may have been established at the controller.
Why Panasonic Security Camera cannot operate using the wireless remote control?
If you cannot operate your Panasonic Security Camera using the wireless remote control, check if the remote control's batteries have run down or if they've been installed with reversed polarities. If the status display lamp doesn't blink when operating the remote near the signal light-sensing area, replace the batteries. Also, ensure the IR ID switches are set correctly. If there's a fluorescent light or plasma monitor nearby, make sure the wireless remote control signal light-sensing area isn't exposed to its light.
Why Panasonic Security Camera images are not displayed?
If your Panasonic Security Camera images are not displayed, ensure the plug-in viewer software is installed. If [Check for newer versions of stored pages] is not set to [Every time I visit the webpage] in the temporary Internet file settings, IP images may not appear in the live screen [Live]. To fix this, in Internet Explorer, go to Tools - Internet Options, click the General tab, and under Browsing history, click Settings. In the Temporary Internet Files dialog box, select the [Every time I visit the webpage] option.
Why Panasonic Security Camera images from multiple cameras appear sequentially?
When multiple web browsers are running to display H.264 images, images from multiple Panasonic Security Cameras may appear sequentially in a single web browser due to the combination of the personal computer's display adaptor and the driver. Update the first display adaptor to the latest version. If this does not resolve the problem, right-click on the desktop, select [Display settings] from the menu, click [Advanced display settings], select the [Troubleshooting] tab, and click [Change Settings]. Change to [Hardware acceleration] setting to [disable] at the far left, and click [OK].
How to fix Panasonic Digital Camera when tally lamps do not light?
If the tally lamps on your Panasonic Digital Camera do not light, check if the [Tally] setting is set to [Disable]. If it is, change the setting to [Enable].
How to fix Panasonic AW-UE80WP Digital Camera settings on the web setting screen that are not updated or displayed properly?
If the settings on the web setting screen of your Panasonic Digital Camera are not updating or displaying correctly, try the following: For Windows, press the [F5] key to refresh the settings. For Mac, press [Command] + [R]. Also, clear your browser's temporary internet files. In Internet Explorer, go to [Tools] - [Internet Options] - [General] tab - [Browsing history] - [Delete], and select [Temporary Internet files and website files]. In Safari, select [Develop] - [Empty Cache]. Ensure that [Check for newer versions of stored pages] is set to [Every time I visit the webpage] in Internet Explorer's temporary internet file settings. Finally, check if the unit’s ports are being filtered by a firewall or anti-virus software; if so, change the HTTP port number of the unit.
How to fix Panasonic AW-UE80WP Digital Camera that cannot operate using the wireless remote control?
If your Panasonic Digital Camera isn't responding to the wireless remote, first check the batteries. Ensure they haven't run down and are installed with the correct polarity. If the status display lamp doesn't blink when operating the remote near the signal light-sensing area, replace the batteries. Also, verify that the IR ID switches are correctly set. Finally, consider if a nearby fluorescent light or plasma monitor is interfering with the remote's signal.
General| Camera Type | PTZ Camera |
|---|---|
| Sensor Type | 1/2.5-Type MOS Sensor |
| Optical Zoom | 20x |
| Digital Zoom | 10x |
| Pan/Tilt Range | Pan: ±170°, Tilt: -30° to +90° |
| Video Output | HDMI, 3G-SDI, IP |
| IP Connectivity | Yes |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Effective Pixels | 8.3 Megapixels |
| Minimum Illumination | 0.5 lx (F1.8, 50 IRE) |
| Shutter Speed | 1/30 to 1/10, 000 sec |
| Gain | 0 dB to 36 dB |
| White Balance | Auto |
| Pan/Tilt Speed | Pan: 0.1° to 60°/sec, Tilt: 0.1° to 60°/sec |
| Resolution | 4K (3840 x 2160) |
| Frame Rate | up to 60 fps |
| Audio Input | 3.5 mm stereo mini jack |
| Network Protocols | RTSP, RTMP, NDI|HX |
| Power Supply | AC 100-240V |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
