To Next PageTo Next PageHow to fix Panasonic AW-UE80WP Digital Camera it is not possible to download the setting files?
If you cannot download setting files from your Panasonic Digital Camera, check if the file download function has been disabled in your web browser. For Internet Explorer on Windows, go to [Tools] - [Internet Options] - [Security] tab - [Custom level], and ensure that the [Enable] option is selected for [File download].
What to do if my Panasonic AW-UE80WP has no pictures are displayed or the pictures are disturbed?
If no pictures are displayed or the pictures are disturbed on your Panasonic Digital Camera, first ensure that the unit has been properly connected to the other connected devices. If the system switches the picture when the unit to be operated is selected, verify that the correct unit has been selected. Confirm that the image signal setting has been selected correctly. Also, check if external sync signals that are supported by the video signal format are being input.
Why Panasonic AW-UE80WP screens displays take a while to appear?
If the screen displays on your Panasonic Digital Camera take a while to appear, it could be because access is being performed in HTTPS mode, which requires more signal processing. It could also be caused by accessing the unit via proxy on the same local network; configure the web browser settings so that access is not performed via proxy. Another reason could be multiple users accessing the unit's IP images simultaneously, which can slow down image display and reduce the frame rate.
Why Panasonic Digital Camera status display lamp does not light?
If the status display lamp on your Panasonic Digital Camera does not light, check if the [Status Lamp] setting is set to [Disable]. If it is, change the setting to [Enable].
How to fix Panasonic Digital Camera when tally lamps do not light?
If the tally lamps on your Panasonic Digital Camera do not light, check if the [Tally] setting is set to [Disable]. If it is, change the setting to [Enable].
How to fix Panasonic AW-UE80WP Digital Camera settings on the web setting screen that are not updated or displayed properly?
If the settings on the web setting screen of your Panasonic Digital Camera are not updating or displaying correctly, try the following: For Windows, press the [F5] key to refresh the settings. For Mac, press [Command] + [R]. Also, clear your browser's temporary internet files. In Internet Explorer, go to [Tools] - [Internet Options] - [General] tab - [Browsing history] - [Delete], and select [Temporary Internet files and website files]. In Safari, select [Develop] - [Empty Cache]. Ensure that [Check for newer versions of stored pages] is set to [Every time I visit the webpage] in Internet Explorer's temporary internet file settings. Finally, check if the unit’s ports are being filtered by a firewall or anti-virus software; if so, change the HTTP port number of the unit.
How to fix Panasonic AW-UE80WP Digital Camera that cannot operate using the wireless remote control?
If your Panasonic Digital Camera isn't responding to the wireless remote, first check the batteries. Ensure they haven't run down and are installed with the correct polarity. If the status display lamp doesn't blink when operating the remote near the signal light-sensing area, replace the batteries. Also, verify that the IR ID switches are correctly set. Finally, consider if a nearby fluorescent light or plasma monitor is interfering with the remote's signal.
What to do if my Panasonic Digital Camera cannot access from a web browser?
If you cannot access your Panasonic Digital Camera from a web browser, ensure a category 5e or above LAN cable is connected to the LAN connector. Check if the [LINK] LED of the LAN connector is lit; if not, there may be a problem with the LAN connection or the network. Verify the camera's power is on. Ensure a valid IP address is set in the unit and that you are accessing the correct IP address. If using HTTPS, access via "https://" with the port number. Confirm the IP address isn't being used by another unit and that the subnet mask matches the network subnet. If a proxy server is set in your web browser, configure it to not use a proxy for the camera's IP address. Finally, verify the default gateway setting is correct, consulting with your network administrator if needed.
General| Camera Type | PTZ Camera |
|---|---|
| Sensor Type | 1/2.5-Type MOS Sensor |
| Optical Zoom | 20x |
| Digital Zoom | 10x |
| Pan/Tilt Range | Pan: ±170°, Tilt: -30° to +90° |
| Video Output | HDMI, 3G-SDI, IP |
| IP Connectivity | Yes |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Effective Pixels | 8.3 Megapixels |
| Minimum Illumination | 0.5 lx (F1.8, 50 IRE) |
| Shutter Speed | 1/30 to 1/10, 000 sec |
| Gain | 0 dB to 36 dB |
| White Balance | Auto |
| Pan/Tilt Speed | Pan: 0.1° to 60°/sec, Tilt: 0.1° to 60°/sec |
| Resolution | 4K (3840 x 2160) |
| Frame Rate | up to 60 fps |
| Audio Input | 3.5 mm stereo mini jack |
| Network Protocols | RTSP, RTMP, NDI|HX |
| Power Supply | AC 100-240V |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
